Tag: System

Electrical

Electrical Power System Analysis

Oct 14, 2013 by Rizki Satrio 0 Comments #analisa, #Analysis, #bagus, #berkualitas, #bexcellent, #Electrical, #harmonisasi, #jogja, #listrik, #pelatihan, #peserta, #portal, #Power, #proteksi, #starting, #System, #training, #transformator, #yogyakarta

COURSE OBJECTIVES:
 Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
 Recognize coordination related disturbances and outages.
 Collect the required data to perform a detailed coordination study.
 Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

COURSE CONTENTS:
1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology
 Effects of Short Circuits
 Fault Current Sources
 Machine Reactances
 Fault Current Characteristics
3. Electrical Equipment Ratings
 Fuses
 Circuit Breakers
 Motor Starters
 Conductors and Bus
4. Balanced Fault Calculations
5. Coordination Fundamentals
 Procedures
 Data Collection
 Scaling Factors
6. Plotting Time/Current Curves
 Circuit Breakers
 Fuses
 Time Delay/Instantaneous Relays
 Relay Coordination Intervals
7. Equipment Protection and Coordination
 NEC and ANSI/IEEE Criteria
 Conductors (Low and Medium Voltage)
 Transformers
 Motors e. Conductors (Low and Medium)

WHO SHOULD ATTEND:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

INSTRUCTOR
DR. Suharyanto

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Mechanical

Bearing Technology & Lubrication System

Oct 11, 2013 by Rizki Satrio 0 Comments #aligment, #bagus, #Balancing, #Bearing, #berkualitas, #bexcellent, #bisnis, #industri, #instruktur, #jogja, #klasifikasi, #latihan, #Lubrication, #machine, #Mechanical, #memuaskan, #misaligned, #murah, #pelatihan, #perusahaan, #peserta, #portal, #Sertifikasi, #System, #Technology, #tolerance, #training, #yogyakarta

DESKRIPSI
This course covers real-world bearing lubrication in a dynamic, skills-based learning approach. Upon course completion, students will have learned the skills needed to choose, apply and maintain lubricants in bearing applications plant wide.
Upon completion this course,
• Participant will be able to evaluate and select appropriate lubricants for a wide variety of rolling element bearing applications. For greased applications, this includes choosing an appropriate grease base, stiffness, base oil and additives, if needed, for proper operation.
• The participant will also be able to compute grease intervals and re lubrication amounts for a variety of application conditions, such as contamination, high or low temperatures and vibration.
• For oil lubricated applications, the participant will be able to choose the correct oil viscosity, delivery method (standing oil, circulating oil, air/oil, oil mist) and oil change out intervals.
• The participant will be to evaluate filter effectiveness, and to select and apply appropriate filter(s).
• The participant will be able to troubleshoot common lubrication problems and recommend corrective actions.

MATERI KURSUS
1. Lubrication fundamentals
• Functions of lubrication
• Basic expressions
• Lubricant additives and their effects
• Avoiding surface damage in bearings
2. Grease lubrication
• Grease functions and properties
• Grease delivery and metering systems
• Selection of grease type: choosing the right grade, base, and oil for you application
3. Oil lubrication
• Choosing the right lubricant: oil and grease quality standards and testing
• Effects of cleanliness and contamination
• Using bearings new life theory to predict effects of contamination
• Effects of water ingress
• Effective use of filtration, choosing the right filter
• Change out intervals
• Bearing housing design concepts
• Comparison of oil delivery methods: static, wick-feed, lifting rings, circulating oil, mist, air-oil, oil spot
• Determining oil flow rates
4. Applying lubricants
• Determining lubrication quantities and intervals
• Hands-on lubrication and lubrication procedures for pillow blocks, ball bearings, roller bearings, sealed and shielded bearings
• Electric Motor lubrication
5. Common error
Over greasing, under greasing, mixing greases
Upon completion this course,
• Participant will be able to evaluate and select appropriate lubricants for a wide variety of rolling element bearing applications. For greased applications, this includes choosing an appropriate grease base, stiffness, base oil and additives, if needed, for proper operation.
• The participant will also be able to compute grease intervals and re lubrication amounts for a variety of application conditions, such as contamination, high or low temperatures and vibration.
• For oil lubricated applications, the participant will be able to choose the correct oil viscosity, delivery method (standing oil, circulating oil, air/oil, oil mist) and oil change out intervals.
• The participant will be to evaluate filter effectiveness, and to select and apply appropriate filter(s).
• The participant will be able to troubleshoot common lubrication problems and recommend corrective actions.

PESERTA
Maintenance personnel and engineers responsible for bearing lubrication, lubricant specification and lubrication system planning and design.

INSTRUKTUR
Ir. Rini Dharmastiti, MSc. PhD.(Expert in bearing lubrication)

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Health Safety and Environment

Integrated Qhse Management System

Oct 11, 2013 by Rizki Satrio 0 Comments #berkualitas, #bexcellent, #ekosistem, #fasilitas, #instruktur, #Integrated, #jogja, #kebijakan, #lengkap, #lokal, #Management, #mendukung, #murah, #pelatihan, #pembangunan, #pengelolaan, #peserta, #portal, #Qhse, #Sertifikasi, #System, #training, #yogyakarta

DESKRIPSI
Pelatihan ini akan memberi gambaran kepada para peserta tentang bagaimana mengintegrasikan tiga sistem manajemen, yang meliputi Sistem Manajemen Mutu (ISO 9001:2000), Sistem Manajemen Lingkungan (ISO 14001:2004) dan Sistem Manajemen Kesehatan dan Keselamatan Kerja (OHSAS 18001:1999).

MANFAAT PELATIHAN:
Setelah mengikuti pelatihan ini, diharapkan peserta akan dapat
• Memahami persyaratan ISO 9001:2000, ISO 14001:2004 dan OHSAS 18001:1999 untuk kegiatan operasional organisasinya.
• Dapat memberikan kesadaran tentang aspek QHSE kepada para staffnya.
• Memahami Ruang Lingkup dan Dokumentasi QHSE
• Memahami bagaimana mengimplementasikan Sistemnya
• Memahami Pengelolaan Rekaman QHSE

MATERI PELATIHAN
1. Pemahaman persyaratan ISO 9001:2000
2. Pemahaman persyaratan ISO 14001:2004
3. Pemahaman persyaratan OHSAS 18001:1999
4. Identifikasi Bahaya, Penilaian Resiko dan pengendaliannya (HIRARC)
5. Identifikasi dan pengendalian Aspek dan dampak terhadap lingkungan
6. Rencana Tanggap Darurat
7. Struktur dan pembentukan bisnis proses organisasi mendukung untuk integrasi sistem manajemen
8. Membuat Kebijakan, Program dan Sasaran QHSE, serta pencapaiannya
9. Peningkatan berkelanjutan / Continual Improvement

PESERTA PELATIHAN
Wakil Manajemen atau pengendali Sistem Manajemen di organisasi atau Team yang ditunjuk untuk menjalankan sistem di organisasi, termasuk pemilik proses kunci, manajer, supervisor yang terlibat dalam pembuatan sistem manajemen.

INSTRUKTUR :
Gilbert Markus Nisahpih

WAKTU DAN TEMPAT

–

JGJ/BDG/JKT/BALI

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Hotel berbintang di Yogyakarta ( Grand Aston, Ibis, Phonix, Novotel )

REGISTRASI

Electrical

Distributed Control System (Dcs)

Oct 11, 2013 by Rizki Satrio 0 Comments #aset, #computer, #Control, #Dcs, #Distributed, #instrumentasi, #jogja, #kontrol, #manajemen, #pelatihan, #pesertamportal, #pondasi, #proaktif, #study dasar, #System, #training, #yogyakarta

DESKRIPSI
Bidang kontrol/ instrumentasi dalam dunia industri mempunyai peranan yang sangat significant, apalagi dalam proses yang membutuhkan presisi, kehandalan dan keamanan sistem. Instrumentasi industri telah menjadi bidang yang memberikan manfaat yang sangat besar terutama dalam kegiatan otomatisasi industri.
Sistem Instrumentasi merupakan sebuah sistem yang meliputi pengaturan variable-variabel seperti temperature (temperature), tekanan (pressure), aliran (flow) dan kecepatan (speed). Variable-variable ini merupakan keluaran yang harus dijaga tetap sesuai dengan keinginan yang telah ditetapkan terlebih dahulu oleh operator yang disebut set point.

Kursus ini akan membahas aplikasi praktis dari sistem kontrol terdistribusi. Termasuk didalamnya adalah hubungan antara pengendali programmable logic control (PLC) dan DCS. Selanjutnya termasuk pentingnya Human Computer Interfaces (HMI) dan strategi pengendalian yang lebih tinggi, yang hampir tidak akan mungkin tanpa adanya bantuan aplikasi komputer. Peserta akan diperkenalkan dengan beberapa studi dasar atau pondasi manajemen asset sebagai alat untuk sistem pemeliharaan proaktif.

MATERI TRAINING
1. Computer Interfacing
2. DCS Konfigurasi Dasar Controller
3. Gangguan Kontrol Otomatis
4. Advanced Sistem DCS
5. Pengendalian Strategi Lanjutan
6. Box Level Control
7. Sequence Program Linked ke Control dari Data Highway Tingkat Box
8. Contoh Praktis Level 2/3 Kontrol
9. Pemeliharaan Pertimbangan (Maintenance Considerations)
10. Pemeliharaan Persyaratan Sistem dan Elemen Sistem
11. Prosedur untuk Memeriksa Kalibrasi Control Loop
12. IN-dibangun Diagnostics dan Pemeliharaan Rutinitas Diagnostik
13. Persyaratan untuk Instalasi UPS Sistem

PESERTA
untuk para perancang, operator, engineer, penyelia, manajer, dan lain-lainnya yang ingin mengetahui/mendalami sistem kontrol terdistribusi.

INSTRUKTUR
TUGINO, ST., MT.

Hotel berbintang di Yogyakarta ( Grand Aston*****/ Phonix**** / Ibis***/ Jambu Luwuk**** )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Advance Troubleshooting Ups

Oct 11, 2013 by Rizki Satrio 0 Comments #abnormal, #Advance, #daya, #Electrical, #engineers, #jogja, #kontinuitas, #listrik, #memahami, #pelatihan, #pengoperasian, #peserta, #portal, #Power, #suplay, #System, #technicians, #training, #troubelshooting, #Troubleshooting, #Ups, #yogyakarta

DESKRIPSI
Kontinuitas pelayanan Daya Listrik dalam suatu Industri sangatlah vital, karena hal ini menyangkut proses produksi. Untuk mendapatkan keandalan system catu daya listrik dalam menjamin kontinuitas pelayanan diperlukan suatu Sistem Catu Daya tak terputus (Uninterruptible Power Suply), oleh karena itu kehadiran UPS sangatlah penting terutama untuk beban-beban yang bersifat kritis.

TUJUAN PELATIHAN
Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan peserta tentang sistem Catu Daya tak terputus (Uninterptible Power Suply) di Industri. Pelatihan ditekankan pada aspek pengoperasian, proteksi, pemeliharaan dan troubleshooting, sehingga setelah mengikuti pelatihan ini peserta akan dapat :
• Mengetahui konfigurasi system Catu Daya Listrik Tak terputus di Industri
• Mengetahui macam-macam teknologi system UPS
• Memahami system operasi masing-masing Bagian system UPS
• Mengidentifikasi kondisi abnormal pada system UPS
• Dapat melakukan Troubleshooting pada UPS

MATERI KURSUS
• Sistem UPS Overview (System Configuration, Principle of Operation, Types of UPS System)
• Semiconductor on UPS System (Component Characteristic, Component Parameters, Component Selection)
• Digital System on UPS (Logic Gates, Sequencial Component, System Display)
• Signal Processing on UPS (Operational Amplifier, Comparator Circuits, Pulse Width Modulator Circuits)
• Converter AC to DC (Types of Converters, Converter topology, Principle of Operation, Filter Circuit)
• Battery and Battery Charger (Types of battery, battery Characteristics, Types of Battery Charger)
• DC to AC Converter (Types of Converters, Converter topology, Principle of Operation, Filter Circuit)
• UPS Protection (Over Current Protection, Surge Protection, dv/dt protection, di/dt protection)
• UPS TroubleShooting Techniques (Abnormal Conditions on AC to DC Converter, Abnormal Conditions on Charger System, Abnormal Conditions on DC to AC Converter)

PESERTA
Electrical Engineers, Electrical Maintenance Tradespeople & Technicians, Instrumentation and Control Engineers, Power System Protection and Control Engineers, etc.

INSTRUKTUR
Tugino, ST.MT

Tempat : Hotel Ibis*** Malioboro Yogyakarta

METODE
Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Industrial

Advanced Industrial Process Control

Oct 11, 2013 by Rizki Satrio 0 Comments #Advanced, #Control, #Data, #electronic, #flow, #hazards, #industrial, #instruktur, #Instrumentation, #level, #network, #Operation, #pelatihan, #peserta, #pesertamportal, #pneumatic, #problem, #Process, #sensors, #System, #training, #trends, #typical

OBJECTIVES
This course is intended for entry-level instrumentation mechanics or experienced electricians who need to understand the basics of industrial process control. With a focus upon OSHA compliance, the participants will be introduced to process control with the understanding that the individual must be qualified person to be able to work on the equipment. With that in mind the person will learn about the construction, operation, and how to avoid the hazards associated with both pneumatic and electronic process controllers.

COURSE CONTENTS
1. Pneumatic and hydraulic pressure concepts
2. Pressure, force, and strain sensors and calibrations
3. Level detectors and calibrations
4. Fluid and gas flow concepts
5. Flow detectors
6. Typical problems in instrumentation systems
7. Smart instrumentations
8. Instrumentation data communications and networks
9. Trends in sensors and instrumentation
10. Designing and installing instrumentation systems
11. Troubleshooting instrumentation systems

WHO SHOULD ATTEND
This course is best suited who are familiar with basic electricity, technicians, electricians, maintenance personnel, engineers, operators, managers and supervisors.

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

INSTRUKTUR
Bambang Noroyono, ST

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 5.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

IT

Linux Fundamental

Oct 10, 2013 by Rizki Satrio 0 Comments #directories, #directory, #editing, #files, #Fundamental, #jaringan, #latihan, #Linux, #manipulating, #overview, #pelatihan, #portal, #programming, #provide, #shell, #System, #training, #utility

DESCRIPTION
This course provide a comprehensive coverage about all aspects requires when start implementing Linux-based system. This course also covers how to leverage Linux utilities using shell-programming capabilities.
COURSE OUTLINE

Intro To Linux
• Overview of Linux
• Linux Version
• Login into the system

Linux session
• Knowing shell
• User and machine identity
• Linux User manual
• Manipulating Files
• Utility GREP

Editor vi
• Specifying terminal type
• Editing session
• Vi Features
• Setting parameters
• Advanced Editing techniques

Linux Filesystem
• Linux standard directories
• File type
• Home Directory
• Manipulating Directories
• Access Permissions
• Links
Process I/O
• File Descriptor
• Standard input, output and error
• Redirection
• Here Document
• Pipe
• Filter

Born Again Shell (Bash)
• Linux shells
• Profiles
• History
• Bash script
• Job control

Linux Process
• Foreground & Background process
• Process status
• Signals

Advanced Linux Utilities
• Sort
• Cut
• Uniq, diff, and others

Shell Programming
• Shell Variables
• Control Structures
• Building application with Shell

PESERTA
Pelatihan ini sangat sesuai diikuti oleh semua karyawan yang ingin mengembangkan kemampuan IT khususnya di bidang Open Source Linux

INSTRUKTUR
Ardiansyah, ST, M.Cs
• Pakar dan Praktisi di Komunitas Open Source “Linux”
• S1 Uninersitas Ahmad Dahlan Yogyakarta
• S2 Pasca Sarjana Ilmu Komputer MIPA UGM
• Dosen dan Trainer di berbagai Perguruan Tinggi
• Penulis Buku Linux di Elexmedia Komputindo

Tempat : Grand Palace Hotel***

REGISTRASI
Biaya kursus Rp. 6.000.000,- per orang (Non Residential)

Electrical

Protection On Electrical Power System

Oct 10, 2013 by Rizki Satrio 0 Comments #circuits, #consistent, #disturbance, #effects, #Electrical, #jogja, #latihan, #pelatihan, #peserta, #portal, #Power, #Protection, #protective, #recognize, #related, #requirements, #simpler, #study, #System, #training, #yogyakarta

Course Objectives:

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

Course Contents:

1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

  • Effects of Short Circuits
  • Fault Current Sources
  • Machine Reactances
  • Fault Current Characteristics

3. Electrical Equipment Ratings

  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus

4. Balanced Fault Calculations
5. Coordination Fundamentals

  • Procedures
  • Data Collection
  • Scaling Factors

6. Plotting Time/Current Curves

  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals

7. Equipment Protection and Coordination

  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)

Who Should Attend:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ Jambu Luwuk )

INSTRUCTOR
DR. Suharyanto

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Electrical Power System Analysis

Oct 10, 2013 by Rizki Satrio 0 Comments #Analysis, #collect, #consistent, #distribution, #Electrical, #jogja, #pelatihan, #peserta, #portal, #Power, #powr, #settings, #simpler, #study, #System, #training, #yogyakarta

COURSE OBJECTIVES:

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

COURSE CONTENTS:
1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

  • Effects of Short Circuits
  • Fault Current Sources
  • Machine Reactances
  • Fault Current Characteristics

3. Electrical Equipment Ratings

  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus

4. Balanced Fault Calculations
5. Coordination Fundamentals

  • Procedures
  • Data Collection
  • Scaling Factors

6. Plotting Time/Current Curves

  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals

7. Equipment Protection and Coordination

  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)

WHO SHOULD ATTEND:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

INSTRUCTOR
DR. Suharyanto

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)