Tag: Technology

Oil and Gas

Pipe & Pipeline Technology

Oct 30, 2019 by Satrio Rizki 0 Comments #aksesoris, #bagus, #bexcellent, #jogja, #keterampilan, #kompresor, #korosi, #latihan, #nyaman, #perlindungan, #Pipe, #Pipeline, #portal, #Technology, #training, #yogyakarta

Pipe & Pipeline Technology

Pipe & Pipeline Technology-Kursus ini akan memberikan pengetahuan dan ketrampilan para peserta dalam bidang pemipaan. Dimana jenis pipa, penentuan diameter pipa, serta tekanan operasi akan dibahas. Disamping itu akan dijelaskan pula instrumentasi, meter dan aksesoris yang diperlukan. Pemipaan atau penempatan pipa di darat dan di laut, pengetesan kualitas pipa dan pemeliharaan, serta cara perlindungan dari korosi juga akan dibahas secara mendetail. Begitu pula pemilihan pompa atau kompresor yang tepat akan ditambahkan, sehingga melengkapi kursus ini dari semua aspek yang berhubungan dengan sistem pemipaan.

Materi Pelatihan Pipe & Pipeline Technology

  1. Pendahuluan
  2. Sifat fisik fluida hidrokarbon
  3. Sifat fisik gas bumi
  4. Sifat pipa minyak
    • Penentuan diameter
    • Penurunan tekanan
    • Tekanan operasi dan kelas pipa
  5. Sistem pipa gas
    • Perhitungan diameter dan penurunan tekanan
    • Pipa paralel dan seri
    • Tekanan operasi dan kelas pipa
  6. Instrumentasi dan aksesoris
    • Jenis valve
    • Penyangga pipa
    • Fleksibilitas pipa
    • Sistem pengamanan
    • Instrumentasi pengukuran (metering)
  7. Penempatan pipa di darat dan di laut
    • Pipa di darat
    • Pipa di laut
  8. Pengetesan kualitas pipa
  9. Perlindungan pipa dan korosi
  10. Pompa dan kompresor
  11. Cara pengukuran debit (transportasi)

Peserta Pelatihan Pipe & Pipeline Technology

Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

Koordinator
Ir. Rini Dharmastiti, M.Sc., P.hD.

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

Waktu & Tempat

Tanggal:

  • 16 sd 19 September 2019
  • 22 sd 24 Oktober 2019
  • 19 sd 21 November 2019
  • 17 sd 19 Desember 2019
  • 21 sd 23 Januari 2020
  • 18 sd 20 Februari 2020
  • 17 sd 19 Maret 2020
  • 14 sd 16 April 2020
  • 19 sd 21 Mei 2020
  • 16 sd 18 Juni 2020
  • 14 sd 16 Juli 2020
  • 18 sd 20 Agustus 2020
  • 15 sd 17 September 2020
  • 20 sd 22 Oktober 2020
  • 17 sd 19 November 2020
  • 22 sd 24 Desember 2020

Waktu: 08.00 – 16.00 WIB

Fasilitas

  1. Training Module
  2. Certificate
  3. Jacket or Batik
  4. Qualified Bag
  5. Training Photo
  6. Training room with full AC facilities and multimedia
  7. Once lunch and twice coffee break every day of training
  8. Qualified Instructor
  9. Transportation from airport / railway to hotel and from hotel to the training venue

Rika Agustina
Mobile/ WA : 0853-3016-5633
Email : rika@bexcellentjogja.com
WEB :www.bexcellentjogja.com

Oil and Gas

Introduction to Geothermal System and Technology

Oct 30, 2019 by Satrio Rizki 0 Comments #And, #electricity, #exploration, #generator, #geotermal, #Geothermal, #Introduction, #jogja, #latihan, #pelathan, #peserta, #portal, #project, #scope, #System, #Technology, #training, #yogyakarta

Introduction to Geothermal System and Technology

Introduction to Geothermal System and Technology-This course aim to provide background knowledge on most aspects of geothermal energy system and technology, including characteristics and types of geothermal system, main components of hydrothermal system, types and characteristics of surface manifestations, conceptual models, rock and fluid properties, scope of geothermal projects, overview of preliminary survey, geothermal exploration, covering geology, geochemistry and geophysical exploration, drilling and reservoir engineering, well testing, production facilities, utilization of geothermal energy for electricity generation.

Course details Introduction to Geothermal System and Technology 

  1. Terjadinya Sistem Panas Bumi
  2. Sistem Panas Bumi: Definisi dan Klasifikasi
  3. Kegiatan Survey reconnaisance: metoda, data, ouput dan perhitungan cadangan spekulatif
  4. Kegiatan Survey Eksplorasi Rinci: metoda, data, ouput dan perhitungan cadangan spekulatif hipotesis dan cadangan terduga
  5. Pemboran eksplorasi: perencanaan target, data, ouput dan perhitungan cadangan mungkin dan terbukti
  6. Studi kelayakan, Perencanaan Pengembangan Lapangan
  7. Sifat Fluida Panas Bumi
  8. Pengujian Sumur Panas Bumi: Tujuan, jenis-jenis pengujian, uji Komplesi, uji panas
  9. Pengujian Sumur Panas Bumi: Tujuan, jenis-jenis pengujian, uji Komplesi, uji panas
  10. Uji Transien tekanan
  11. Fasilitas Produksi Uap
  12. Fasilitas Produksi Uap
  13. Penentuan Daya Listrik/Konsumsi Uap Siklus Konversi Uap Kering
  14. Penentuan Daya Listrik/Konsumsi Uap Siklus Konversi Uap Hasil Pemisahan
  15. Siklus Pembangkit Lain

Who Should Attend

geologists, rig crews ,drilling contract and service company personnel, Shaker Attendants, and any other personnel who are included in Geothermal Project.

Instruktur : Ir. Nenny Miryani Saptadji, PhD

Waktu & Tempat

Tanggal:

  • 16 sd 19 September 2019
  • 22 sd 24 Oktober 2019
  • 19 sd 21 November 2019
  • 17 sd 19 Desember 2019
  • 21 sd 23 Januari 2020
  • 18 sd 20 Februari 2020
  • 17 sd 19 Maret 2020
  • 14 sd 16 April 2020
  • 19 sd 21 Mei 2020
  • 16 sd 18 Juni 2020
  • 14 sd 16 Juli 2020
  • 18 sd 20 Agustus 2020
  • 15 sd 17 September 2020
  • 20 sd 22 Oktober 2020
  • 17 sd 19 November 2020
  • 22 sd 24 Desember 2020

Waktu: 08.00 – 16.00 WIB

Fasilitas

  1. Training Module
  2. Certificate
  3. Jacket or Batik
  4. Qualified Bag
  5. Training Photo
  6. Training room with full AC facilities and multimedia
  7. Once lunch and twice coffee break every day of training
  8. Qualified Instructor
  9. Transportation from airport / railway to hotel and from hotel to the training venue

Rika Agustina
Mobile/ WA : 0853-3016-5633
Email : rika@bexcellentjogja.com
WEB :www.bexcellentjogja.com

Mechanical

Pipe & Pipeline Technology

Oct 14, 2013 by bexcellentjogja 0 Comments #aligment, #bagus, #Balancing, #berkualitas, #bexcellent, #bisnis, #industri, #instruktur, #jogja, #klasifikasi, #latihan, #machine, #Mechanical, #memuaskan, #misaligned, #murah, #pelatihan, #perusahaan, #peserta, #Pipe, #Pipeline, #portal, #Sertifikasi, #Technology, #tolerance, #training, #yogyakarta

DESKRIPSI
Kursus ini akan memberikan pengetahuan dan ketrampilan para peserta dalam bidang pemipaan. Dimana jenis pipa, penentuan diameter pipa, serta tekanan operasi akan dibahas. Disamping itu akan dijelaskan pula instrumentasi, meter dan aksesoris yang diperlukan. Pemipaan atau penempatan pipa di darat dan di laut, pengetesan kualitas pipa dan pemeliharaan, serta cara perlindungan dari korosi juga akan dibahas secara mendetail. Begitu pula pemilihan pompa atau kompresor yang tepat akan ditambahkan, sehingga melengkapi kursus ini dari semua aspek yang berhubungan dengan sistem pemipaan.

MATERI
1. Pendahuluan
2. Sifat fisik fluida hidrokarbon
3. Sifat fisik gas bumi
4. Sifat pipa minyak
• Penentuan diameter
• Penurunan tekanan
• Tekanan operasi dan kelas pipa
5. Sistem pipa gas
• Perhitungan diameter dan penurunan tekanan
• Pipa paralel dan seri
• Tekanan operasi dan kelas pipa
6. Instrumentasi dan aksesoris
• Jenis valve
• Penyangga pipa
• Fleksibilitas pipa
• Sistem pengamanan
• Instrumentasi pengukuran (metering)
7. Penempatan pipa di darat dan di laut
• Pipa di darat
• Pipa di laut
8. Pengetesan kualitas pipa
9. Perlindungan pipa dan korosi
10. Pompa dan kompresor
11. Cara pengukuran debit (transportasi)

PESERTA
Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

INSTRUKTUR
Ir. Rini Dharmastiti, M.Sc., P.hD.

Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per orang (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Mechanical

Gas Turbine Technology

Oct 14, 2013 by bexcellentjogja 0 Comments #aligment, #bagus, #Balancing, #berkualitas, #bexcellent, #bisnis, #Gas, #industri, #instruktur, #jogja, #klasifikasi, #latihan, #machine, #Mechanical, #memuaskan, #misaligned, #murah, #pelatihan, #perusahaan, #peserta, #portal, #Sertifikasi, #Technology, #tolerance, #training, #Turbine, #yogyakarta

COURSE DESCRIPTION:
The use of Gas Turbines in the Power Generation, Petrochemical and Pipeline Industries has increased considerably in the last few years. The development, in particular, of Combined Cycle and Combined Heat and Power applications has accelerated the use of Industrial Gas Turbines. This course will cover the design, operation and maintenance of the various types of Gas Turbine and Gas Turbine applications. Presenting this course at our facility will allow attendees to see practical examples of Gas Turbine Components, types of component faults and associated repair techniques.

WHO SHOULD ATTEND:
The primary function of this five-day course is to allow the attendee a detailed understanding of the applications, operations and maintenance of Gas Turbines. Therefore this course is targeted at technicians and engineers involved in the operation and maintenance of Gas Turbines. Experienced engineers and maintenance specialists will also benefit from attending this course as will those managers concerned with the maintenance scheduling and repair aspects of Gas Turbines.
For further information on the practical training offered on this course,
Please see the facilities at our MJB Workshop

COURSE OUTLINE:
• Types of Gas Turbine and Gas Turbine Applications
o Heavy Duty Gas Turbines
o Aero-Derivative Gas Turbines
o Two-shaft Gas Turbines
o Simple Cycle/Combined Cycle/ Combined Heat and Power Applications
• Major Components of a Gas Turbine
o Compressor/Combustor/Turbine
• Compressor Components
o Compressor Design/Effects on Performance
o Compressor Washing Techniques/Philosophies
• Combustion Components
o Combustion Liner Design/Types
o Combustion Liner Materials/Repair
o Fuel Nozzle Design/Repair
o Environmental Control for Combustion Systems
 Types Of Environmental Control
 Installation/Retrofitting Environmental Control Systems
• Hot Gas Path Components
o Blade Materials/Design
o Nozzle Materials/Design
o Blade/Nozzle Inspection Techniques (Dye Penetrate, Eddy Current)
o Blade/Nozzle Defects (Corrosion, Erosion, Oxidation)
o Coatings and Coating Application Techniques
o Evaluating Components for Repair
o Repair Techniques and Materials
• Gas Turbine Systems
o Lubrication Systems
 Lube Oil Types
 Oil Monitoring and Cleaning
o Fuel Systems
 Fuel Properties and Selection
 Fuel Measurement
 Supply Systems
 Heavy Fuels and Fuel Dosing
 Fuel Performance Impacts
 Environmental Considerations
o Bearings
 Types of Bearing
 Bearing Materials and Repairs
o Additional Systems
 Starting Systems
 Inlet Air Systems/Filtering
• Control Systems
• Types of Control System
• Evaluating/Collecting Control System Data
• Evaluating Control System Retrofits/Upgrades
• Pressure, Temperature and Vibration Monitoring

INSTRUKTUR
Ir. JUMANDA KASDADI

Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Mechanical

Centrifugal Pumps Technology

Oct 11, 2013 by bexcellentjogja 0 Comments #aligment, #bagus, #Balancing, #berkualitas, #bexcellent, #bisnis, #Centrifugal, #industri, #instruktur, #jogja, #klasifikasi, #latihan, #machine, #Mechanical, #memuaskan, #misaligned, #murah, #pelatihan, #perusahaan, #peserta, #portal, #Pumps, #Sertifikasi, #Technology, #tolerance, #training, #yogyakarta

OBJECTIVES
To enable the participants to understand the performance, technology and operation of centrifugal pumps. The course provides the main knowledge required for troubleshooting, maintenance and commissioning and is illustrated with applications and examples from industrial processes.

COURSE CONTENTS
Hydrodynamics applied to pumping system : pump performance, pipe system, application
Centrifugal pump technology and selection : selection criteria, application, mechanical seal selection, installation
Centrifugal pump operation

WHO SHOULD ATTEND
Graduate engineers involved in centrifugal pump operation, maintenance or engineering

INSTRUKTUR
Ir. Rini Dharmastiti, M.Sc., P.hD.Praktisi Bidang Engineering

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Mechanical

Bearing Technology & Lubrication System

Oct 11, 2013 by bexcellentjogja 0 Comments #aligment, #bagus, #Balancing, #Bearing, #berkualitas, #bexcellent, #bisnis, #industri, #instruktur, #jogja, #klasifikasi, #latihan, #Lubrication, #machine, #Mechanical, #memuaskan, #misaligned, #murah, #pelatihan, #perusahaan, #peserta, #portal, #Sertifikasi, #System, #Technology, #tolerance, #training, #yogyakarta

DESKRIPSI
This course covers real-world bearing lubrication in a dynamic, skills-based learning approach. Upon course completion, students will have learned the skills needed to choose, apply and maintain lubricants in bearing applications plant wide.
Upon completion this course,
• Participant will be able to evaluate and select appropriate lubricants for a wide variety of rolling element bearing applications. For greased applications, this includes choosing an appropriate grease base, stiffness, base oil and additives, if needed, for proper operation.
• The participant will also be able to compute grease intervals and re lubrication amounts for a variety of application conditions, such as contamination, high or low temperatures and vibration.
• For oil lubricated applications, the participant will be able to choose the correct oil viscosity, delivery method (standing oil, circulating oil, air/oil, oil mist) and oil change out intervals.
• The participant will be to evaluate filter effectiveness, and to select and apply appropriate filter(s).
• The participant will be able to troubleshoot common lubrication problems and recommend corrective actions.

MATERI KURSUS
1. Lubrication fundamentals
• Functions of lubrication
• Basic expressions
• Lubricant additives and their effects
• Avoiding surface damage in bearings
2. Grease lubrication
• Grease functions and properties
• Grease delivery and metering systems
• Selection of grease type: choosing the right grade, base, and oil for you application
3. Oil lubrication
• Choosing the right lubricant: oil and grease quality standards and testing
• Effects of cleanliness and contamination
• Using bearings new life theory to predict effects of contamination
• Effects of water ingress
• Effective use of filtration, choosing the right filter
• Change out intervals
• Bearing housing design concepts
• Comparison of oil delivery methods: static, wick-feed, lifting rings, circulating oil, mist, air-oil, oil spot
• Determining oil flow rates
4. Applying lubricants
• Determining lubrication quantities and intervals
• Hands-on lubrication and lubrication procedures for pillow blocks, ball bearings, roller bearings, sealed and shielded bearings
• Electric Motor lubrication
5. Common error
Over greasing, under greasing, mixing greases
Upon completion this course,
• Participant will be able to evaluate and select appropriate lubricants for a wide variety of rolling element bearing applications. For greased applications, this includes choosing an appropriate grease base, stiffness, base oil and additives, if needed, for proper operation.
• The participant will also be able to compute grease intervals and re lubrication amounts for a variety of application conditions, such as contamination, high or low temperatures and vibration.
• For oil lubricated applications, the participant will be able to choose the correct oil viscosity, delivery method (standing oil, circulating oil, air/oil, oil mist) and oil change out intervals.
• The participant will be to evaluate filter effectiveness, and to select and apply appropriate filter(s).
• The participant will be able to troubleshoot common lubrication problems and recommend corrective actions.

PESERTA
Maintenance personnel and engineers responsible for bearing lubrication, lubricant specification and lubrication system planning and design.

INSTRUKTUR
Ir. Rini Dharmastiti, MSc. PhD.(Expert in bearing lubrication)

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)