Tag: Power

Electrical Power Analysis Using Etap
Electrical

Electrical Power Analysis Using Etap

Oct 30, 2019 by Rizki Satrio 0 Comments #analisa, #Analysis, #Electrical, #Etap, #filter, #jogja, #koordinasi, #listrik, #Motor, #nalisa, #pelatihan, #peserta, #portal, #Power, #starting, #training, #transfarmator, #transint, #Using, #yogyakarta

Electrical Power Analysis Using Etap

Electrical Power Analysis Using Etap-Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa serta penyetelan proteksi sistem tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada motor-motor listrik, analisa transformator, serta proteksi untuk keduanya . Selain itu juga akan disampaikan tentang Analisa Hubung singkat, Analisa Motor Starting, Analisa Koordinasi Proteksi, Analisa Transien serta Analisa Harmonisa

Tujuan Pelatihan Electrical Power Analysis Using Etap

Setelah mengikuti pelatihan peserta akan dapat :

  • Meningkatkan pengetahuan dan wawasan mengenai pemanfaatan ETAP untuk aplikasi di bidang Electrical Power
  • Melakukan Analisa Aliran Daya menggunakan ETAP
  • Melakukan Analisa Motor dan Transformator menggunakan ETAP
  • Melakukan Analisa Hubung Singkat menggunakan ETAP
  • Melakukan Analisa Motor Starting menggunakan ETAP
  • Melakukan Analisa Koordinasi Proteksi
  • Melakukan Analisa Transient menggunakan ETAP
  • Melakukan Studi Harmonisa dan menentukan ukuran Filter

Materi Pelatihan Electrical Power Analysis Using Etap

  1. Building One-Line Diagram Using ETAP
  2. Load Flow Study Using ETAP
  3. Short-Circuit Analysis Using ETAP
  4. Motor Acceleration Analysis Using ETAP
  5. Protection Device Coordination Analysis Using ETAP
  6. Transient Stability Anaysis Using ETAP
  7. Harmonic Analysis Using ETAP

Peserta Pelatihan Electrical Power Analysis Using Etap

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

Instruktur
Tugino, ST MT

Waktu & Tempat

Tanggal:

  • 16 sd 19 September 2019
  • 22 sd 24 Oktober 2019
  • 19 sd 21 November 2019
  • 17 sd 19 Desember 2019
  • 21 sd 23 Januari 2020
  • 18 sd 20 Februari 2020
  • 17 sd 19 Maret 2020
  • 14 sd 16 April 2020
  • 19 sd 21 Mei 2020
  • 16 sd 18 Juni 2020
  • 14 sd 16 Juli 2020
  • 18 sd 20 Agustus 2020
  • 15 sd 17 September 2020
  • 20 sd 22 Oktober 2020
  • 17 sd 19 November 2020
  • 22 sd 24 Desember 2020

Waktu: 08.00 – 16.00 WIB

Fasilitas

  1. Training Module
  2. Certificate
  3. Jacket or Batik
  4. Qualified Bag
  5. Training Photo
  6. Training room with full AC facilities and multimedia
  7. Once lunch and twice coffee break every day of training
  8. Qualified Instructor
  9. Transportation from airport / railway to hotel and from hotel to the training venue

Rika Agustina
Mobile/ WA : 0853-3016-5633
Email : rika@bexcellentjogja.com
WEB :www.bexcellentjogja.com

IT

Crystal Report

Oct 25, 2019 by Rizki Satrio 0 Comments #bagus, #berkulitas, #connect, #critical, #Crystal, #database, #distribution, #group, #jogja, #latihan, #murah, #obtain, #outpun, #pelatihan, #portal, #Power, #Process, #Report, #return, #training, #useful, #yogyakarta

Crystal Report

Crystal Report is the primary recommended course you should take if your job responsibilities require you to obtain output from database. In this course, you will build basic list and group report that work with almost any database.

Course Bonafits

With the power of this industry-leading report-writing tool, Crystal Reports users and developers can integrate their organization’s data, making sophisticated reports readily available to support critical business decisions. In this hands-on course, you gain extensive experience using Crystal Reports to connect to databases, retrieve raw data, format data, and create and present reports for widespread distribution. You return to your organization with a detailed process to help you connect to data sources and create useful reports right away.

Course Outline

  1. Creating a Report
    • Set Default Report Setting
    • Specify Fields for a New Report
    • Preview the Report
    • Modify Field Display
    • Add Fields From Additional Tables
  2. Displaying Specific Report Data
    • Find Data
    • Sort Data
    • Filter Data by single Criteria
  3. Grouping Report Data
    • Insert a Group
    • Add Summaries
    • Format Summary Information
    • Change Group Options
    • Filter by Group
    • Create a Top N sort Group
  4. Building Formulas
    • Write a Formula
    • Group by Formula
    • Build a Filter by Multiple Criteria
    • Create parameter Field
    • Write a Formula that incorporates Null Fileds
  5. Formating Reports
    • Remove White Space
    • Insert Page Header/Footer Data
    • Add Border and lines
    • Change the Margins
  6. Enhancing Reports
    • Create a section to Contain a Watermark
    • Insert Object Using OLE
    • Modify Format Based on Data Value
    • Insert Hyperlinks
  7. Creating and Modifying Pie Charts
    • Create Pie Chart with Drill Down
    • Modify Chart Text
    • Format Chart
    • Present a Chart by Group
  8. Distributing Data
    • Export to PDF
    • Export to Excel
    • Export to Access Database
    • Create a Report Definitions
    • Create Mailing Labels
  9. Distributing Data
    • Export to PDF
    • Export to Excel
    • Export to Access Database
    • Create a Report Definitions
    • Create Mailing Labels
  10. Creating Running Totals
    • Create a Running Total Field
    • Modify a Running Total Field
    • Create a Manual Running Total on Detail Data
    • Create a Manual Running Total on summary Data
  11. Building Cross-tabs in Your Report
    • Create a Cross tab
    • Create a Specified Group Order
    • Filter a Cross Tab by Group
    • Change the cross tab format
    • Conditionally Format Rows and Columns
  12. Adding SubReports
    • Insert a SubReport
    • Link a subreport to data in a Primary Report
    • Edit a SubReport
    • Format a subreport using the format editor
    • Share Formulas Between Main and Subreport
  13. Creating Drill Downs
    • Create a Drill Down
    • Create separate headings for Drill Down
  14. Enhancing Report Processing Using SQL
    • Create a Report using SQL Query
    • Summarize Report Data Using SQL Aggregate Function
    • Create Join Using SQL
    • Create Subqueries
  15. Charting Data
    • Create Bar Chart
    • Modify Chart
    • Create a Top N Chart
    • Format a Chart
    • Create a Chart Template
  16. Reporting on Excel Data
    • Create a Report Based on Excel Data
    • Modify a Report Generated from exel data
    • Update Data in a Report Based on Excel Data

Who Should Attend

Anyone involved in creating reports from stored data. Experience using Windows and working with a spreadsheet is assumed.

Instructur

Agung Budi Wobowo, MT
– Pakar dan Praktisi di bidang Crystal Report
– S1 Institute Teknologi Bandung
– S2 Teknik Elektro Univeristas Gadjah Mada
– Staf Ahli PUSKOM UGM

Waktu & Tempat

Tanggal:

  • 16 sd 19 September 2019
  • 22 sd 24 Oktober 2019
  • 19 sd 21 November 2019
  • 17 sd 19 Desember 2019
  • 21 sd 23 Januari 2020
  • 18 sd 20 Februari 2020
  • 17 sd 19 Maret 2020
  • 14 sd 16 April 2020
  • 19 sd 21 Mei 2020
  • 16 sd 18 Juni 2020
  • 14 sd 16 Juli 2020
  • 18 sd 20 Agustus 2020
  • 15 sd 17 September 2020
  • 20 sd 22 Oktober 2020
  • 17 sd 19 November 2020
  • 22 sd 24 Desember 2020

Waktu: 08.00 – 16.00 WIB

Fasilitas

  1. Training Module
  2. Certificate
  3. Jacket or Batik
  4. Qualified Bag
  5. Training Photo
  6. Training room with full AC facilities and multimedia
  7. Once lunch and twice coffee break every day of training
  8. Qualified Instructor
  9. Transportation from airport / railway to hotel and from hotel to the training venue

Rika Agustina
Mobile/ WA : 0853-3016-5633
Email : rika@bexcellentjogja.com
WEB :www.bexcellentjogja.com

Industrial

Industrial Power Systems Engineering & Device Coordination

Oct 14, 2013 by Rizki Satrio 0 Comments #Audit, #auditor, #bagus, #baik, #berkualitas, #Coordination, #device, #dunia, #Engineering, #evaluator, #industrial, #interprentasi, #jogja, #kesehatan, #Keselamatan, #latihan, #lingkungan, #manajemen, #menjanjikan, #murah, #pelatihan, #portal, #Power, #prinsip, #Sertifikasi, #Systems, #training, #yogyakarta

FOR INDUSTRIAL & COMMERCIAL POWER SYSTEMS
This course is designed for electrical engineers responsible for industrial or commercial power systems planning, designs for reliability and overall system performance. Students will calculate available short circuit current at varied power system one-line locations to learn how to properly size fuses, cables, breakers and transformers. By learning protective device coordination, load shedding may be accomplished with minimal impact to power system operation.

COURSE CONTENT
At the completion of this course, students will be familiar with utilization of the following power system tools:
• Short circuit calculations
• Power factor improvement
• Recommended motor / generator / transformer protection
• Switchgear and system voltage selection
• Voltage drop / flicker reduction
• Equipment / system grounding practices
• Load estimating techniques
• Plant modernization recommendations
• Protective device coordination
– Fuses and thermal overload devices
– Electro-mechanical and solid state relays
– Transformers, cables and bus bars
– Circuit breakers

INSTRUKTUR
Tugino, ST.MT

Tempat : Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 5.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Protection On Electrical Power System

Oct 14, 2013 by Rizki Satrio 0 Comments #analisa, #bagus, #berkualitas, #bexcellent, #Electrical, #harmonisasi, #jogja, #listrik, #on, #pelatihan, #peserta, #portal, #Power, #Protection, #proteksi, #starting, #System, #training, #transformator, #yogyakarta

Course Objectives:

 Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
 Recognize coordination related disturbances and outages.
 Collect the required data to perform a detailed coordination study.
 Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

Course Contents:

1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology
 Effects of Short Circuits
 Fault Current Sources
 Machine Reactances
 Fault Current Characteristics
3. Electrical Equipment Ratings
 Fuses
 Circuit Breakers
 Motor Starters
 Conductors and Bus
4. Balanced Fault Calculations
5. Coordination Fundamentals
 Procedures
 Data Collection
 Scaling Factors
6. Plotting Time/Current Curves
 Circuit Breakers
 Fuses
 Time Delay/Instantaneous Relays
 Relay Coordination Intervals
7. Equipment Protection and Coordination
 NEC and ANSI/IEEE Criteria
 Conductors (Low and Medium Voltage)
 Transformers
 Motors e. Conductors (Low and Medium)

Who Should Attend:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ Jambu Luwuk )

INSTRUCTOR
DR. Suharyanto

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Power Transformer Maintenance

Oct 14, 2013 by Rizki Satrio 0 Comments #analisa, #bagus, #berkualitas, #bexcellent, #Electrical, #harmonisasi, #jogja, #listrik, #Maintenance, #pelatihan, #peserta, #portal, #Power, #proteksi, #starting, #training, #transformator, #Transformer, #yogyakarta

Deskripsi
Electric transformer merupakan salah satu peralatan yang penting dalam industri. Apabila terjadi kerusakan maka akan menimbulkan dampak berantai di dalam proses di suatu industri. Oleh karena itu diperlukan maintenance (perawatan) yang berkala agar supaya electric transformer tersebut bekerja dengan baik.

Materi Pelatihan
Materi pelatihan mencakup antara lain:
1. Pengantar trafo: struktur dan prinsip kerja; spesifikasi trafo
2. Analisis operasi trafo: rangkaian ekivalen; Pembebanan, losses & regulasi tegangan
3. Interprestasi data name plate 1: data listrik 1 ( ragam parameter ); data listrik 2 ( dampak )
4. Interprestasi data name plate 2: data mekanis 1 ( ragam parameter : suhu, dll ); data mekanis 2 ( dampak)
5. Sistem tindakan perawatan trafo: identifikasi keluhan & troubleshooting; preventive maintenance & overhaul
6. Pelaporan: proteksi parameter mekanis; proteksi parameter elektris
7. Proteksi trafo: pengukuran resistansi, DAR & PI; Hi-pot test
8. Diskusi kasus

Peserta
Pelatihan ini sangat bermanfaat bagi engineer/operator bagian utilitas dan maintenance

Instruktur:
Tugino, S.T., M.T.

Tempat : Hotel Papandayan, Bandung

Registrasi
Rp. 7.000.000 per orang (Non Residential)

Electrical

Electrical Power System Analysis

Oct 14, 2013 by Rizki Satrio 0 Comments #analisa, #Analysis, #bagus, #berkualitas, #bexcellent, #Electrical, #harmonisasi, #jogja, #listrik, #pelatihan, #peserta, #portal, #Power, #proteksi, #starting, #System, #training, #transformator, #yogyakarta

COURSE OBJECTIVES:
 Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
 Recognize coordination related disturbances and outages.
 Collect the required data to perform a detailed coordination study.
 Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

COURSE CONTENTS:
1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology
 Effects of Short Circuits
 Fault Current Sources
 Machine Reactances
 Fault Current Characteristics
3. Electrical Equipment Ratings
 Fuses
 Circuit Breakers
 Motor Starters
 Conductors and Bus
4. Balanced Fault Calculations
5. Coordination Fundamentals
 Procedures
 Data Collection
 Scaling Factors
6. Plotting Time/Current Curves
 Circuit Breakers
 Fuses
 Time Delay/Instantaneous Relays
 Relay Coordination Intervals
7. Equipment Protection and Coordination
 NEC and ANSI/IEEE Criteria
 Conductors (Low and Medium Voltage)
 Transformers
 Motors e. Conductors (Low and Medium)

WHO SHOULD ATTEND:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

INSTRUCTOR
DR. Suharyanto

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Electrical Power Analysis Using Etap

Oct 14, 2013 by Rizki Satrio 0 Comments #analisa, #Analysis, #bagus, #berkualitas, #bexcellent, #Electrical, #Etap, #harmonisasi, #jogja, #listrik, #pelatihan, #peserta, #portal, #Power, #proteksi, #starting, #training, #transformator, #Using, #yogyakarta

DESKRIPSI
Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa serta penyetelan proteksi sistem tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada motor-motor listrik, analisa transformator, serta proteksi untuk keduanya . Selain itu juga akan disampaikan tentang Analisa Hubung singkat, Analisa Motor Starting, Analisa Koordinasi Proteksi, Analisa Transien serta Analisa Harmonisa

TUJUAN
Setelah mengikuti pelatihan peserta akan dapat :
• Meningkatkan pengetahuan dan wawasan mengenai pemanfaatan ETAP untuk aplikasi di bidang Electrical Power
• Melakukan Analisa Aliran Daya menggunakan ETAP
• Melakukan Analisa Motor dan Transformator menggunakan ETAP.
• Melakukan Analisa Hubung Singkat menggunakan ETAP
• Melakukan Analisa Motor Starting menggunakan ETAP
• Melakukan Analisa Koordinasi Proteksi
• Melakukan Analisa Transient menggunakan ETAP
• Melakukan Studi Harmonisa dan menentukan ukuran Filter

MATERI KURSUS
1. Building One-Line Diagram Using ETAP
2. Load Flow Study Using ETAP
3. Short-Circuit Analysis Using ETAP
4. Motor Acceleration Analysis Using ETAP
5. Protection Device Coordination Analysis Using ETAP
6. Transient Stability Anaysis Using ETAP
7. Harmonic Analysis Using ETAP

PESERTA
Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

INSTRUKTUR
Tugino, ST MT

Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ Melia Purosani )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Advance Troubleshooting Ups

Oct 11, 2013 by Rizki Satrio 0 Comments #abnormal, #Advance, #daya, #Electrical, #engineers, #jogja, #kontinuitas, #listrik, #memahami, #pelatihan, #pengoperasian, #peserta, #portal, #Power, #suplay, #System, #technicians, #training, #troubelshooting, #Troubleshooting, #Ups, #yogyakarta

DESKRIPSI
Kontinuitas pelayanan Daya Listrik dalam suatu Industri sangatlah vital, karena hal ini menyangkut proses produksi. Untuk mendapatkan keandalan system catu daya listrik dalam menjamin kontinuitas pelayanan diperlukan suatu Sistem Catu Daya tak terputus (Uninterruptible Power Suply), oleh karena itu kehadiran UPS sangatlah penting terutama untuk beban-beban yang bersifat kritis.

TUJUAN PELATIHAN
Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan peserta tentang sistem Catu Daya tak terputus (Uninterptible Power Suply) di Industri. Pelatihan ditekankan pada aspek pengoperasian, proteksi, pemeliharaan dan troubleshooting, sehingga setelah mengikuti pelatihan ini peserta akan dapat :
• Mengetahui konfigurasi system Catu Daya Listrik Tak terputus di Industri
• Mengetahui macam-macam teknologi system UPS
• Memahami system operasi masing-masing Bagian system UPS
• Mengidentifikasi kondisi abnormal pada system UPS
• Dapat melakukan Troubleshooting pada UPS

MATERI KURSUS
• Sistem UPS Overview (System Configuration, Principle of Operation, Types of UPS System)
• Semiconductor on UPS System (Component Characteristic, Component Parameters, Component Selection)
• Digital System on UPS (Logic Gates, Sequencial Component, System Display)
• Signal Processing on UPS (Operational Amplifier, Comparator Circuits, Pulse Width Modulator Circuits)
• Converter AC to DC (Types of Converters, Converter topology, Principle of Operation, Filter Circuit)
• Battery and Battery Charger (Types of battery, battery Characteristics, Types of Battery Charger)
• DC to AC Converter (Types of Converters, Converter topology, Principle of Operation, Filter Circuit)
• UPS Protection (Over Current Protection, Surge Protection, dv/dt protection, di/dt protection)
• UPS TroubleShooting Techniques (Abnormal Conditions on AC to DC Converter, Abnormal Conditions on Charger System, Abnormal Conditions on DC to AC Converter)

PESERTA
Electrical Engineers, Electrical Maintenance Tradespeople & Technicians, Instrumentation and Control Engineers, Power System Protection and Control Engineers, etc.

INSTRUKTUR
Tugino, ST.MT

Tempat : Hotel Ibis*** Malioboro Yogyakarta

METODE
Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Protective Relay

Oct 10, 2013 by Rizki Satrio 0 Comments #collect, #complete, #derive, #device, #equipment, #jogja, #latihan, #pelatihan, #peserta, #portal, #Power, #protect, #protective, #Relay, #training, #transformers, #yogyakarta

DESKRIPSI
• Identify the Effects of Current Transformers (CTs) on Power Systems Protection.
• Recognize Protective Relay Coordination Related Disturbances and Outages.
• Collect the Required Data to Perform a Detailed Coordination Study.
• Derive Complete Protective Relay Device Settings to Protect the Electrical Power Systems Equipment.

MATERI KURSUS
1. Introduction to Power Systems Relaying
• System Planning
• Power System Studies
• Phasor Fundamentals
• Relaying Principles
• Review of Short Circuit Calculations
• Fundamentals of Coordination
2. Power Systems Grounding
• Symmetrical Components
• Ungrounded Systems
• Solidly-Grounded Systems
• Resistance-Grounded Systems
• Ground Fault Detection Methods
3. Current Transformers
• Types, CT Ratios, Polarity
• Burden, Accuracy Classes, Saturation Calculations
4. Protection Fundamentals
• Line, Cables, Feeders
• Medium Voltage Motors
• Power Transformers
5. Protective Relay Schemes
• Directional Relays
• Differential Relays
• Ground Relays

PESERTA
Consultants, application engineers, design engineers and electrical engineers from large industrial plants or municipal distribution systems with complex protective relay needs will find this course highly beneficial. Attendance at the Siemens Westinghouse Industrial Power Systems Analysis Seminar or equivalent is strongly recommended as a prerequisite

INSTRUKTUR
Tugino, ST.MT

Tempat : Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Protection On Electrical Power System

Oct 10, 2013 by Rizki Satrio 0 Comments #circuits, #consistent, #disturbance, #effects, #Electrical, #jogja, #latihan, #pelatihan, #peserta, #portal, #Power, #Protection, #protective, #recognize, #related, #requirements, #simpler, #study, #System, #training, #yogyakarta

Course Objectives:

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

Course Contents:

1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

  • Effects of Short Circuits
  • Fault Current Sources
  • Machine Reactances
  • Fault Current Characteristics

3. Electrical Equipment Ratings

  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus

4. Balanced Fault Calculations
5. Coordination Fundamentals

  • Procedures
  • Data Collection
  • Scaling Factors

6. Plotting Time/Current Curves

  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals

7. Equipment Protection and Coordination

  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)

Who Should Attend:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ Jambu Luwuk )

INSTRUCTOR
DR. Suharyanto

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)