Archive: March 25, 2014

Civil and Construction

Basic Contruction-Involve In Budgeting Civil Project

Mar 25, 2014 by Rizki Satrio 0 Comments #Basic Contruction-Involve In Budgeting Civil Project, #dasar konstruksi, #Konstruksi Kerangka Bangunan, #pembangunan, #perencana konstruksi bangunan, #Training Dasar-dasar Konstruksi

DESKRIPSI
Pemahaman tentang dasar konstruksi sangatlah dibutuhkan bagi para pelaku konstruksi, terutama bagi yang terlibat dalam pengelolaan kontraktor yang ditunjuk untuk pelaksanaan pembangunan. Peningkatan kompetensi dalam hal ini dapat dilakukan melalui kegiatan training yang komprehensif.

MATERI
1. Pemahaman Bagian Rumah / Gedung
• Bagian Bawah
• Bagian Tengah
• Bagian Atas

2. Perancangan Bangunan
• Gambar denah dan Desain Bangunan
• Memilih Sistem Bangunan

3. Perencanaan dan Pengendalian Waktu
• Pendefinisian Kegiatan
• Pentahapan Kegiatan
• Perkiraan Durasi Kegiatan
• Pengembangan Jadwal
• Pengendalian Jadwal

4. Perkiraan dan Pengendalian Biaya
• Perkiraan Biaya
• Penganggaran Biaya
• Pendanaan
• Pengendalian Biaya

5. Struktur Fondasi

6. Konstruksi Kerangka Bangunan

7. Konstruksi Lantai

8. Konstruksi Kerangka ringan Kayu

9. Finis Eksterior Konstruksi Kerangka ringan Kayu

10. Finis Interior Konstruksi Kerangka ringan Kayu

11. Pasangan Batu bata

12. Tembok Pasangan Batu dan Beton

13. Konstruksi Dinding Pemikul Benan Tembok

14. Konstruksi Kerangka Baja dan Baja Tipis.

PESERTA
Training Dasar-dasar Konstruksi ini ditujukan untuk para perencana konstruksi bangunan, arsitek, pengawas pelaksanaan proyek atau engineer yang terkait dengan fungsi perencanaan konstruksi bangunan di instansi pemerintahan / swasta.

INSTRUKTUR

Ir. Sentot Hardwiyono, MT, P.hd

WAKTU & TEMPAT
Tanggal :

3 Days
27 – 29 Jan 2015
28 – 30 Apr 2015
07 – 09 Jul 2015
27 – 29 Oct 2015

JGJ/BDG/JKT/BALI

Waktu : 08.00 – 16.00 WIB

METODE
Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI

Civil and Construction

AutoCAD 2012

Mar 25, 2014 by Rizki Satrio 0 Comments #AutoCAD 2012, #Pelatihan AutoCAD 2012

DESKRIPSI
The AutoCAD 2012 Update for AutoCAD 2011 Users training guide introduces the new and enhanced features of AutoCAD 2012. Topics covered range from general improvements and command enhancements to new 3D modeling techniques and customization workflow. There are enhancements to many commands as well many new commands have been added.
Among the many changes in this new release are the general user interface components such as, Command Line, UCS, Ribbon, Multifunctional Grips, Object selections, Snapping, Quick Properties, External References, and Layers.
There are several updates to commands such as Fillet, Chamfer, Join, Spline, Multileaders, and various 3D tools such as 3D Model Import file types, Presspull, Point Clouds, Trimmed surface properties, and creation previews. Many new tools are introduced such as Nudge, Blend Curve, DWG Convert, 3D Offset Edge, Autodesk Exchange, and the Associative Array commands (Rectangular, Polar, and the new Path).
Some major new functionality includes the power to automatically generate intelligent documents based on 3D models with the new Drawing Views toolset. Another function to revolutionize online collaboration is the direct access to AutoCAD WS. Finally, searching for objects within your large database and libraries is improved with the new arrival of the Content Explorer.

MATERI
• Interface enhancements
• Object selection and grouping
• Multifunctional grips
• Command enhancements including Fillet, Chamfer, Join, and Spline
• New object moving functionality – Nudge
• New object connection with continuity too – Blend Curve
• Associative Arrays including Rectangular, Polar, and new Path
• Style enhancements to External References, Multileaders, and Layers
• UCS improvements
• New 3D Model Import file type list
• New 3D Offset Edge command
• Various 3D command enhancements
• New Automatic 3D Model Documentation toolset
• New DWG conversion capabilities
• Customization updates, including Migration, Resets, File support, and File paths
• New Autodesk Exchange
• New direct access to AutoCAD WS
• New Content Explorer

PESERTA
Project Leader and Estimator, Contractor and Consultant in construction projects

INSTRUKTUR
Akhmad Aminullah, Ir., M.T, Ph.D.

WAKTU & TEMPAT
Tanggal :
3 Days

20 – 22 Jan 2015
21 – 23 Apr 2015
07 – 09 Jul 2015
20 – 22 Oct 2015

JGJ/BDG/JKT/BALI

Waktu : 08.00 – 16.00 WIB
Tempat : Hotel berbintang di Yogyakarta ( Grand Aston*****/ Phoenix**** / Ibis***/ Ibis Style Hotel )

METODE
Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI

Civil and Construction

Advanced Foundation Design & Analysis With Computer Program

Mar 25, 2014 by Rizki Satrio 1 Comments #Advanced Foundation Design, #Analysis With Computer Program

DESKRIPSI

Pelatihan ini dimaksudkan sebagai upaya untuk memperdalam pengetahuan mengenai Pondasi dan memperkuat filosofi untuk perencanaan dan analisis Pondasi. Dalam pelatihan ini akan dibahas mengenai berbagai kegagalan pondasi tiang dan teknologi mengatasinya, permasalahan konstruksi pondasi tiang pada tanah lunak ditambah dengan perencanaan dan analisis Pondasi Mesin.

TUJUAN

• Memahami penyebab kegagalan pada pondasi tiang dan cara mengatasinya
• Memahami penggunaan LRFD
• Memahami perencanaan pondasi mesin
• Memahami penggunaan program komputer dalam analisi pondasi tiang

MATERI

1. Kegagalan Pondasi Tiang dan Teknologi Mengatasinya
2. Metode Konstruksi Pondasi Tiang
3. Masalah Konstruksi Pondasi Tiang pada Tanah Lunak
4. Perancangan Pondasi Tiang
5. Load and Resistance Factor Design (LRFD)
6. Pengantar Pondasi Dinamis / Pondasi Mesin
7. Pengantar Teori Vibrasi
8. Parameter Dinamik Tanah
9. Analisis Pondasi Mesin Sistem Blok dan Tiang Bor
10. Aplikasi Program Komputer

PESERTA

Pelatihan dirancang untuk para sarjana teknik sipil yang berprofesi sebagai project manager, engineering maneger & consultant, site planner, mine planner, foundation engineer, kontraktor, akademisi (dosen dan mahasiswa); para praktisi dunia teknik sipil pada umumnya serta para praktisi geoteknik khususnya.

INSTRUKTUR

Akhmad Aminullah, Ir., M.T, Ph.D.

WAKTU & TEMPAT

Tanggal :

3 Days
06 – 07 Jan 2015
07 – 09 Apr 2015
01 – 03 Jul 2015
06 – 08 Oct 2015

JGJ/BDG/JKT/BALI

Waktu : 08.00 – 16.00 WIB

METODE

Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS

1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI

Civil and Construction

Advanced Building Maintenance Management

Mar 25, 2014 by Rizki Satrio 0 Comments #General Affair, #Pelatihan bexcellentjogja, #Pelatihan untuk meningkatkan pengelolaan aset perusahaan, #Prinsip Dasar Building Management, #training

DESKRIPSI
Bangunan / gedung beserta fasilitas dan infrastruktur pendukung lainnya merupakan aset perusahaan yang harus dipertahankan dan dipelihara agar fungsi dan manfaatnya dapat dimanfaatkan dalam jangka panjang. Demi mencapai tujuan tersebut, maka perlu ada upaya system pengelolaan yang professional. Pengelolaan tersebut mencakup kebjakan-kebijakan bagi pengguna gedung (user) hingga penjadwalan perawatan dan instalasasi. Tanpa adanya pengelolaan dan pemeliharaan gedung yang baik dan terencana, tentu akan berimplikasi pada terganggunya kinerja perusahaan secara keseluruhan.
Agar pemeliharaan semua aset dimaksud dapat berjalan dengan baik, maka diperlukan suatu ketentuan atau prosedur pemeliharaan yang baku sebagai pedoman pemeliharaan yang harus diketahui untuk dapat dilaksanakan oleh semua pihak terkait.

TUJUAN
Pelatihan ini bertujuan untuk meningkatkan kompetensi peserta terhadap pemahaman tentang berbagai aspek yang berkaitan dengan pengelolaan asset perusahaan secara efektif dan efisien. Selain itu peserta mampu mengimplentasikan tools dan perangkat kerja yang terkait dengan bidang tersebut.

MATERI
1. Peran General Affairs dan Engineer dalam Pengelolaan Gedung
2. Prinsip Dasar Building Management
3. Ekonomi Teknik dan Penyusunan Anggaran dalam Pengelolaan Gedung
4. Manajemen Pemeliharaan Instalasi Gedung
• Sistem Kelistrikan Arus Kuat
• Sistem Kelistrikan Arus Lemah
• Design Building Civil Structure for Maintenance
• Fire Fighting Sistem dan VAC
5. Perangkat Kerja Perawatan Gedung
6. Manajemen Proyek
7. Safety Engineering
8. Preventive Maintenance & Total Productive Maintenance
9. Saving Energy
10. Value Engineering

PESERTA
Peserta yang diharapkan berpartisipasi dalam program ini adalah pengelola gedung (building manager) dan bagian pengelolaan aset perusahaan General Affair, para Maintenance Engineer, Teknisi dan Engineer bidang maintanance building.

INSTRUKTUR
Ir. Sentot Hardiwiyono, MT. Phd

WAKTU & TEMPAT
Tanggal :
3 Days
13 – 15 Jan 2015
14 – 16 Apr 2015
01 – 03 Jul 2015
20 – 22 Oct 2015

JGJ/BDG/JKT/BALI

Waktu : 08.00 – 16.00 WIB

METODE
Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training

REGISTRASI

Mechanical

Process Control And Systems Engineering (Ps-14)

Mar 24, 2014 by Rizki Satrio 0 Comments #Konsep Dasar Pengendalian, #Process Control And Systems Engineering (Ps-14)

DESKRIPSI
Operasi suatu pabrik diharapkan dapat berjalan dengan baik sesuai dengan kondisi yang diinginkan. Selain itu pabrik harus memenuhi persyaratan keselamatan proses, memenuhi spesifikasi produk, membuang limbah sesuai peraturan lingkungan hidup, dan mempertimbangkan aspek ekonomi. Adanya persyaratan-persyaratan operasi tersebut menuntut dilakukannya pemantauan secara kontinyu serta pengendalian proses yang tepat sehingga suatu pabrik dapat bekerja secara optimum dan pengaruh gangguan terhadap hasil maupun produksi dapat diminimalkan.

MATERI
1. Konsep Dasar Pengendalian (Basic Process Control)
2. Pengendalian Umpan Balik (Feed Back Control)
3. Sensor dan Alat Ukur (Sensor and Measurement Apparatus)
4. Kelakuan Dinamik (Dynamic Behavior)
5. Valve Pengendali (Control Valve)
6. Stabilitas & Tuning (Stability & Fine Tuning)
7. Pengendalian Cascade & Umpan Maju (Cascade & Feed forward Control)
8. Dasar Pengendalian Pneumatic (Principle of Pneumatic Control)
9. Tingkat Pengendalian (Level Control)
10. Pengendalian Tekanan (Pressure Regulation & Control)
11. Pengendalian Suhu (Temperature Control)
12. Pengendalian Laju aliran (Flow Measurement and Control)
13. Rancangan Sistem Pengendalian (Design of Process Control)

PESERTA
Operators, technicians, supervisors, engineers, etc.

WAKTU & TEMPAT

4 Days

Batch I 03 – 05 Feb 2015

Batch II 05 – 07 May 2015

Batch III 11 – 13 Aug 2015

Batch IV 03 – 05 Nov 2015

JGJ/BDG/JKT/BALI

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Preventive And Predictive Maintenance

Mar 24, 2014 by Rizki Satrio 0 Comments #Preventive And Predictive Maintenance

DESKRIPSI
A study of the role of maintenance technique and management in the life cycle of an asset; determination of optimal maintenance and replacement practices for components and capital equipments; resource of manpower and machinery required for implementations or practices.

MATERI KURSUS
1. Introduction the role and importance of maintenance in the organization
2. Types of maintenance
3. Elements of maintenance cost
4. Data collecting for maintenance cost
5. Total Maintenance Cost Models
6. Determination of Optimal Maintenance Policy
7. Preventive Maintenance, Repair and Replacement
8. Case Study

PESERTA
Dasar pendidikan SLTA/D3, operator/teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

INSTRUKTUR
Ir. Teguh Puji, MT

WAKTU & TEMPAT

4 Days

Batrch I 20 – 22 Jan 2015

Batch II 21 – 23 Apr 2015

Batch III 07 – 09 Jul 2015

Batch IV 20 – 22 Oct 2015

Tempat Training JGJ/BDG/JKT/BALI

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRATION

Mechanical

Piping Engineering And Plant Design

Mar 24, 2014 by Rizki Satrio 0 Comments #Piping Engineering And Plant Design

OBJECTIVES
Piping Engineering: Design, Construction, Maintenance, Integrity, and Repair describes the fundamental steps to any successful piping and pipeline engineering project, whether it’s routine maintenance or a multi-million dollar project new. Explores the understanding of the qualitative details, calculations, and techniques are essential in supporting competent decisions. He pairs coverage of real-world practice with the technical principles that underlie the material, design, construction, inspection, testing, and maintenance.
Upon completion of this course, attendees will have knowledge of piping engineering and plant design requirements and be able to begin applying them in their work.

COURSE CONTENTS
1. Material selection considerations
2. Fittings, flanges, and gaskets
3. Valve functions, types, and selection procedure
4. Loads and stresses
5. Pressure design of components
6. System layout considerations
7. Pipe supports and restraints
8. Piping flexibility
9. Design information required for piping stress analysis
10. Criteria for equipment nozzle loads
11. Fabrication, assembly, erection, inspection, and testing
12. Other considerations:

  • Non-metallic piping
  • Category M fluid service
  • High pressure piping

13. Latest technology on piping design

PESERTA
1. Dasar pendidikan SLTA/D3
2. Operator/Teknisi
3. Pegawai terkait yang membutuhkan pengetahuan dasar tersebut.

INSTRUKTUR
Ir. Rini Dharmastiti, M.Sc., P.hD.

WAKTU & TEMPAT

4 Days

Batch I 13 – 15 Jan 2015

Batch II 14 – 16 Apr 2015

Batch III 01 – 03 Jul 2015

Batch IV 20 – 22 Oct 2015

Tempat Training JGJ/BDG/JKT/BALI

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Pipe & Pipeline Technology

Mar 24, 2014 by Rizki Satrio 0 Comments #Jenis-jenis Pipa, #Pipa, #Pipe & Pipeline Technology

DESKRIPSI
Kursus ini akan memberikan pengetahuan dan ketrampilan para peserta dalam bidang pemipaan. Dimana jenis pipa, penentuan diameter pipa, serta tekanan operasi akan dibahas. Disamping itu akan dijelaskan pula instrumentasi, meter dan aksesoris yang diperlukan. Pemipaan atau penempatan pipa di darat dan di laut, pengetesan kualitas pipa dan pemeliharaan, serta cara perlindungan dari korosi juga akan dibahas secara mendetail. Begitu pula pemilihan pompa atau kompresor yang tepat akan ditambahkan, sehingga melengkapi kursus ini dari semua aspek yang berhubungan dengan sistem pemipaan.

MATERI
1. Pendahuluan

2. Sifat fisik fluida hidrokarbon

3. Sifat fisik gas bumi

4. Sifat pipa minyak
• Penentuan diameter
• Penurunan tekanan
• Tekanan operasi dan kelas pipa

5. Sistem pipa gas
• Perhitungan diameter dan penurunan tekanan
• Pipa paralel dan seri
• Tekanan operasi dan kelas pipa

6. Instrumentasi dan aksesoris
• Jenis valve
• Penyangga pipa
• Fleksibilitas pipa
• Sistem pengamanan
• Instrumentasi pengukuran (metering)

7. Penempatan pipa di darat dan di laut
• Pipa di darat
• Pipa di laut

8. Pengetesan kualitas pipa

9. Perlindungan pipa dan korosi

10. Pompa dan kompresor

11. Cara pengukuran debit (transportasi)

PESERTA
Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

INSTRUKTUR
Ir. Rini Dharmastiti, M.Sc., P.hD.

WAKTU & TEMPAT
• Batch 1  : 25-27 Maret 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 17-19 Juni 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 21-23 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 23-25 Desember 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Modern Maintenance Management

Mar 24, 2014 by Rizki Satrio 0 Comments #Modern Maintenance Management, #Type of maintenance management, #Type of maintenance method

DESCRIPTION
As the requirements for improved productivity and cost effectiveness increase, combined with an increased attention to safety and environmental issues, maintenance activities play an important role. Modern maintenance management techniques will give a significant contribution to a company’s productivity by applying reliability based techniques and cost-benefit analysis for maintenance optimization.
Several companies have experienced the positive effect of improving maintenance management, achieving a better foundation for making the right decisions, and thereby reducing the amount of unplanned maintenance tasks and subsequently unplanned shutdowns.

COURSE CONTENTS
1. Type of maintenance method
• Preventive maintenance
• Predictive maintenance
• Corrective maintenance
• Proactive maintenance

2. Type of maintenance management
• Basic Maintenance Management
• Reliability-Centered Maintenance (RCM)
• Risk Based Maintenance (RBM)
• Total Productive Maintenance (RCM)

3. Basic maintenance management
• Organizing maintenance activities
• Effective maintenance planner
• Maintenance scheduling and critical path
• Maintenance budgeting
• Maintenance job order
• Asset and spare part management

4. Maintenance based on RCM
• RCM Decision Diagram
• Planning, organizing, and controlling the proposed task
• Implementing RCM

5. Maintenance based on TPM
• Organizing, implementing and socializing TPM
• Product and equipment management
• Quality management system
• Administration system
• Evaluating and improving TPM result

6. Modern maintenance management in perspective
• Maintenance in the business process
• Evolution in maintenance management
• The business objectives and maintenance objectives
• Business, operations and maintenance key performance area
• CMMS requirement

7. Asset and spare part management
• Equipment identification and type classification
• Part number and bill of material
• Documentation structures, identification, and classification
• Logistic planning
• Logistic support analysis
• Critical path analysis

PARTICIPANTS
Managers and Senior Engineers from production and maintenance and Everyone who has interest in maintenance strategy for plant equipment.

INSTRUCTOR
Ir. Agus Jayatun, M.T.

VENUE
• Batch 1  : 18-20 Maret 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 10-12 Juni 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 14-16 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 16-18 Desember 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FACILITIES
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Maintenance Of Belt Conveyor

Mar 24, 2014 by Rizki Satrio 0 Comments #Aplikasi umum belt conveyor, #Maintenance Of Belt Conveyor, #Pelatihan Maintenance of Belt Conveyor, #Pemeliharaan belt conveyor

DESKRIPSI
Pelatihan Maintenance of Belt Conveyor ini ditujukan bagi parateknisi pemeliharaan, operator dan supervisor yang mempunyai tugas dan tanggung jawab dalam menjaga agar belt conveyor bekerja sebagaimana mestinya dalam sistem material handling sertapara teknisi dan insinyur dari berbagai disiplin ilmu yang pekerjaan sehari-hari berkaitan dengan penggunaan belt conveyor dalam pengoperasian dan pemeliharaannya. Tidak dapat dibayangkan kerugian yang terjadi jika plant mengalami shutdown akibat belt conveyor rusak atau putus. Untuk itu penting sekali menjaga agar belt conveyor tetap dalam kondisi baik. Belt conveyor seringkali memberikan nilai ekonomis dan kepuasan sebagai metoda transportasi material seperti: material tambang, tanah, pasir, batu pecah, semen, beton segar, dan material lain dalam dunia industri. Semakin cepat dan menerus operasinya semakin besar kapasitas transportasi material.

MATERI
1. Sistem material handling.
2. Aplikasi umum belt conveyor
3. Komponen belt conveyor
4. Memasang belt padaconveyor
5. Menyambung belt (Splicing)
6. Loading and discharge
7. Belt suport
8. Belt cleaning
9. Teknik pemeliharaan dan operasi
10. Safety

PESERTA
Teknisi, bagian maintenance, operator pelaksana dan bagian yg berkaitan dalam pemeliharaan belt conveyor

INSTRUKTUR
Ir. Agus Jayatun, M.T.

WAKTU & TEMPAT
• Batch 1  : 18-20 Februari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 14-16 Mei 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 16-18 September 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 16-18 November 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)