Archive: March 24, 2014

Mechanical

Heat Exchanger: Design, Operation, Maintenance, And Troubleshoting

Mar 24, 2014 by Rizki Satrio 0 Comments #Dasar-dasar prediksi penyebab gejala malfunction suatu heat exchanger, #Heat Exchanger (HE), #Pelatihan penilaian unjuk kerja suatu Heat Exchanger, #Training untuk mengembangkan teknik maintenance heat exchanger

DESCRIPTION
Heat Exchanger (HE) merupakan peralatan yang banyak digunakan dalam industri proses (process industry) yang berfungsi menukarkan/ mengalirkan panas dari suatu fluida ke fluida lainnya. Secara sederhana, prinsip kerja HE adalah dua fluida yang berbeda temperature, yang satu dialirkan dalam tube dan yang lainnya dalam shell hingga bersentuhan secara tidak langsung, sehingga panas dari fluida yang temperaturenya lebih tinggi berpindah ke fluida yang temperaturenya lebih rendah. Hasil dari proses ini adalah fluida panas yang masuk akan menjadi lebih dingin dan fluida dingin yang masuk akan menjadi lebih panas.
Peralatan ini banyak dipasang dalam sistem (plant) yang menghasilakan kalor/ panas yang tinggi sehingga membutuhkan proses pengaturan temperatur yang presisi tinggi agar potensi bahaya yang muncul seperti peledakan, kebocoran dan sebagainya dapat dicegah.
Karena sistem ini sangat berisiko tinggi maka perlu desain sistem, pengoperasian, perawatan dan troubleshooting yang baik dengan mengacu standard desain, operasi serta perawatan yang berlaku.
Setelah mengikuti pelatihan ini peserta diharapkan :
• Mampu melakukan penilaian unjuk kerja suatu heat exchanger,
• Dapat melakukan dasar-dasar prediksi penyebab gejala malfunction suatu heat exchanger,
• Mampu mengembangkan teknik maintenance heat exchanger,
• Memahami dan mampu melakukan perancangan awal berdasarkan rancangan beban kalor/thermal dan rancangan mekanis serta mengetahui bagaimana proses manufakturnya, sehingga mampu memilih spesifikasi heat exchanger,
• Mampu melakukan troubleshooting permasalahn yang muncul dilapangan.

COURSE CONTENTS
1. Fundamental of heat transfer and fluid mechanic theory
2. General heat exchanger types and components
3. Characteristic of heat exchanger
4. Applicable standard for design and calculation of heat exchanger
5. Selection of heat exchanger
6. Material selection based on standard of ASTM
7. Basic design of heat exchanger
8. Perkembangan design heat exchanger
9. Performance of heat exchanger
10. Service life time, reliability and maintenance
11. Program maintenance
12. Real case studies of calculation from field experience problem
13. Operation & troubleshooting

PARTICIPANTS
Karyawan yang membidangi peralatan heat exchanger, teknisi, engineer, supervisor, manager yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

INSTRUCTURE
Ir. Victor Malau, DEA

VENUE
• Batch 1 : 18-20 Maret 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 10-12 Juni 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 14-16 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 14-16 Desember 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FACILITIES
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Generator (Operation, Maintenance, Trouble Shooting)

Mar 24, 2014 by Rizki Satrio 0 Comments #Generator (Operation, #Maintenance, #Pelatihan untuk meningkatkan pengetahuan dan wawasan aspek-aspek engineering pada sistem pembangkitan tenaga listrik, #Pembangkitan Tenaga Listrik, #Prinsip dasar generator, #Trouble Shooting)

DESKRIPSI
Generator adalah peralatan utama pada unit pembangkit yang berfungsi menghasilkan energi listrik. Unjuk kerja generator selain dipengaruhi oleh aspek operasinya sangat dipengaruhi oleh faktor pemeliharaannya. Kesalahan dalam melakukan pemeliharaan akan menyebabkan gangguan vibrasi dan menurunnya kemampuan sehingga kinerja unit turun. Untuk mengatasi masalah tersebut perlu SDM yang kompeten, pelatihan ini dapat memberikan solusi terhadap masalah pemeliharaan generator di unit pembangkit.
Training ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan tentang aspek-aspek engineering pada sistem pembangkitan Tenaga Listrik. Topik training ditekankan pada operasi, proteksi dan pemeliharaan generator maupun sistem penggerak mulanya.

MATERI
1. Prinsip dasar generator
• Distribusi fluks pada sela udara
• Ggl tanpa beban
• Belitan stator/rotor
• Isolasi dan kenaikan temperatur
• Reaksi jangkar
• Reaktansi

2. Gas turbine engines
• Gas turbine engine classifications,
• Principles of operation ,
• fuel system ,
• Cooling system,
• Lubrication system,
• Starting system

3. Governor
• System and Component,
• Governing Fundamentals,
• Principle of Operation

4. Prime Movers Maintenance

5. Electrical Power Generator
• Construction,
• Principles of operation,
• Generator Characteristics

6. Excitation system
• Types of exciters,
• Characteristics of exciters,
• Field flashing,
• AVR system

7. Generator Operation
• Synchronizing to Busbar,
• Loading,
• Generator protection

8. Insulation Testing
• Factors Affecting Insulations,
• Resistance Testing,
• Power Factor Testing,
• High Potential Testing,
• Withstand Voltage Testing

9. Generator Testing and Maintenance
• Stator and Rotor Insulation Test,
• Stator winding Test,
• Rotor Voltage Test,
• Data Interpretation

10. Discussion and cases study

PESERTA
Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation Generator untuk berbagai macam industri

INSTRUKTUR
Ir. Teguh Puji, MT.

WAKTU & TEMPAT
• Batch 1 : 28-30 Januari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 22-24 April 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 26-28 Agustus 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 28-30 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Gas Turbine Technology

Mar 24, 2014 by Rizki Satrio 0 Comments #Contoh gas turbine technology, #Gas Turbine Systems, #Gas Turbine Technology, #Major Components of a Gas Turbine, #types of component faults and associated repair techniques

COURSE DESCRIPTION
The use of Gas Turbines in the Power Generation, Petrochemical and Pipeline Industries has increased considerably in the last few years. The development, in particular, of Combined Cycle and Combined Heat and Power applications has accelerated the use of Industrial Gas Turbines. This course will cover the design, operation and maintenance of the various types of Gas Turbine and Gas Turbine applications. Presenting this course at our facility will allow attendees to see practical examples of Gas Turbine Components, types of component faults and associated repair techniques.

WHO SHOULD ATTEND
The primary function of this five-day course is to allow the attendee a detailed understanding of the applications, operations and maintenance of Gas Turbines. Therefore this course is targeted at technicians and engineers involved in the operation and maintenance of Gas Turbines. Experienced engineers and maintenance specialists will also benefit from attending this course as will those managers concerned with the maintenance scheduling and repair aspects of Gas Turbines. For further information on the practical training offered on this course, Please see the facilities at our MJB Workshop

COURSE OUTLINE
1. Types of Gas Turbine and Gas Turbine Applications
• Heavy Duty Gas Turbines
• Aero-Derivative Gas Turbines
• Two-shaft Gas Turbines
• Simple Cycle/Combined Cycle/ Combined Heat and Power Applications

2. Major Components of a Gas Turbine
• Compressor/Combustor/Turbine

3. Compressor Components
• Compressor Design/Effects on Performance
• Compressor Washing Techniques/Philosophies

4. Combustion Components
• Combustion Liner Design/Types
• Combustion Liner Materials/Repair
• Fuel Nozzle Design/Repair
• Environmental Control for Combustion Systems
*Types Of Environmental Control
*Installation/Retrofitting Environmental Control Systems

5. Hot Gas Path Components
• Blade Materials/Design
• Nozzle Materials/Design
• Blade/Nozzle Inspection Techniques (Dye Penetrate, Eddy Current)
• Blade/Nozzle Defects (Corrosion, Erosion, Oxidation)
• Coatings and Coating Application Techniques
• Evaluating Components for Repair
• Repair Techniques and Materials

6. Gas Turbine Systems
• Lubrication Systems
*Lube Oil Types
*Oil Monitoring and Cleaning
• Fuel Systems
*Fuel Properties and Selection
*Fuel Measurement
*Supply Systems
*Heavy Fuels and Fuel Dosing
*Fuel Performance Impacts
*Environmental Considerations
• Bearings
*Types of Bearing
*Bearing Materials and Repairs
• Additional Systems
*Starting Systems
*Inlet Air Systems/Filtering

7. Control Systems

8. Types of Control System

9. Evaluating/Collecting Control System Data

10. Evaluating Control System Retrofits/Upgrades

11. Pressure, Temperature and Vibration Monitoring

INSTRUCTURE
Ir. Teguh Puji, MT.

VENUE
• Batch 1  : 21-23 Januari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 15-17 April 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 19-21 Agustus 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 21-23 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FACILITIES
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Furnace And Heat Exchanger

Mar 24, 2014 by Rizki Satrio 0 Comments #Bahan bakar, #Furnace And Heat Exchanger, #Jenis-jenis bahan bakar, #Sifat-sifat bahan bakar

DESKRIPSI
Furnace atau dapur atau ruang bakar adalah suatu konstruksi yang dirancang sebagai tempat untuk mendapatkan proses pembakaran, yaitu proses reaksi secara cepat antara unsur/molekul yang terdapat pada bahan bakar dengan oksigen, sehingga menghasilkan kalor. Kalor yang diperoleh digunakan untuk memanaskan zat yang membutuhkan/dikehendaki. Heat exchanger atau alat penukar kalor adalah suatu peralatan yang berfungsi untuk memindahkan kalor dari suatu fluida ke fluida yang lain karena perbedaan temperatur. Berdasarkan mekanisme transfer kalornya, ada berbagai jenis/tipe heat exchanger. Jenis shell dan tube heat exchanger merupakan jenis heat exchanger yang paling bayak digunakan dalam industri. Hal tersebut dikarenakan oleh kemampuannya beroperasi pada tekanan tinggi, pemilihan bahan yang leluasa, pengoperasian yang mudah maupun efektivitas perpindahan kalor yang tinggi.

MATERI
• Tentang berbagai bahan bakar serta sifat-sifatnya
• Tentang peralatan bakar yang terkait dengan jenis bahan bakar yang digunakan dan karakteristiknya.
• Proses pembakaran yang terjadi di dalam furnace
• Alat-alat pengaman dan kontrol pembakaran dalam operasi
• Perawatan furnace
• Berbagai jenis dan konstruksi heat exchanger serta pemilihannya.
• Proses spesifikasi dan desain thermo- hydraulic
• Proses desain mekanis dan standard/code yang ada
• Arah pengembangan heat exchanger untuk peningkatan transfer kalor
• Operasi dan perawatan heat exchanger dan peningkatan reliability heat exchanger
• Instrumen dan kontrol operasi untuk keamanan
• Aspek ekonomi heat exchanger

PESERTA
Para teknisi, engineer, manajer dan personel bagian operasi dan perawatan pada perusahaan secara umum. Peserta training berpendidikan minimal sekolah menengah kejuruan dari bidang teknik.

INSTRUKTUR
Ir. Teguh Puji, MT.

WAKTU & TEMPAT
• Batch 1  : 7-9 Januari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 1-3 April 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 5-7 Agustus 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 7-9 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Emergency Generator System

Mar 24, 2014 by Rizki Satrio 0 Comments #Emergency Generator System, #kondisi emergency, #sistem back up daya listrik, #sistem generator, #System daya listrik

DESKRIPSI
Kehandalan sistem daya listrik dalam sebuah industri harus selalu dijaga. Dalam kondisi tertentu dan karena sesuatu, misalnya gangguan atau kejadian yang emergency, ketersedian daya listrik yang dibutuhkan menjadi terhambat dan terganggu, dan sementara sistem/plant sangat membutuhkan daya listrik yang stabil untuk menjaga proses produksi yang berjalan. Emergency Generator System adalah sebuah sistem back up daya listrik yang dipersiapkan untuk mengantisispasi berbagai kemungkinan kejadian khususnya kejadian yang sifatnya emergency dan kritis.
Dalam pelatihan ini akan dibahas mengenai sistem generator, kondisi-kondisi yang dikatagorikan sebagai kondisi emergency, serta sistem generator untuk antisipasi kondidi kritis secara teknis.

COURSE OUTLINE
1. Model , Struktur Dasar dan Parameter Generator
2. Model Beban
3. Aliran Daya
4. Sensitivitas Tegangan dan Frekuensi Terhadap Beban
5. Sensitivitas Tegangan dan Frekuensi Terhadap Pembangkitan
6. Pembagian Pembebanan Generator
7. Gangguan pada Generator:
• Insulation Faults
• Overload, Overcurrent, Overvoltage
• Unbalanced Loading
• Rotor Faults
• Loss of excitation
• Loss of Synchronism
• Kegagalan Prime Mover
• Overspeeding
8. Emergency Generator (portable, back up generator)
9. Instalasi dan interkoneksi
10. Studi Kasus dan Simulasi

INSTRUKTUR
Ir. Teguh Puji, MT.

PESERTA
Operator, teknisi, engineering, supervisor

WAKTU & TEMPAT
• Batch 1  : 7-9 Januari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 1-3 April 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 5-7 Agustus 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 7-9 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Design For Equipment Lay Out And Piping Systems

Mar 24, 2014 by Rizki Satrio 0 Comments #Design For Equipment Lay Out And Piping Systems, #mengembangkan teknologi di bidang perpipaan secara terintegrasi, #Pelatihan untuk meningkatkan kemampuan analisis dan sintesis, #Training bexcellentjogja Design For Equipment Lay Out And Piping Systems

DESKRIPSI
Dengan mengikuti training ini peserta dapat lebih meningkatkan kemampuan analisis dan sintesis, serta memahami dan mengembangkan secara terintegrasi teknologi di bidang perpipaan.

MATERI
• Dasar-dasar tata letak peralatan
• Spesifikasi (ketentuan-ketentuan) dalam tata letak peralatan, maintainability, operability, accessability, constrictability
• Plot plan and piping layout drawings
• Tata letak dan perpipaan untuk peralatan: pompa kompressor, H E, drum, reactor, tower, furnace, storage tanks
• Instrumentasi
• Rak pipa dan struktur baja
• Perpipaan bawah tanah
• Analisis tegangan pipa

PESERTA
Para junior engineer atau teknisi senior di bidang perpipaan

INSTRUKTUR
Ir. Rini Dharmastiti, M.Sc., P.hD.

WAKTU & TEMPAT
• Batch 1  : 11-13 Maret 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 3-5 Juni 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 7-9 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 9-11 Desember 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Centrifugal Pump Technology

Mar 24, 2014 by Rizki Satrio 0 Comments #Centrifugal Pump Technology, #http://bexcellentjogja.com, #Pelatihan bexcellent, #Training mechanical

DESCRIPTION
To enable the participants to understand the performance, technology and operation of centrifugal pumps. The course provides the main knowledge required for troubleshooting, maintenance and commissioning and is illustrated with applications and examples from industrial processes.

COURSE CONTENTS
1. Hydrodynamics applied to pumping system : pump performance, pipe system, application
2. Centrifugal pump technology and selection : selection criteria, application, mechanical seal selection, installation
3. Centrifugal pump operation

PARTICIPANTS
Graduate engineers involved in centrifugal pump operation, maintenance or engineering

INSTRUCTURE
Ir. Rini Dharmastiti, M.Sc., P.hD. (Praktisi Bidang Engineering)

VENUE
• Batch 1 : 11-13 Februari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 6-8 Mei 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 9-11 September 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 11-13 November 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FACILITIES
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Centrifugal Pump Operation And Maintenance

Mar 24, 2014 by Rizki Satrio 0 Comments #Centrifugal Pump Operation And Maintenance

DESCRIPTION
To enable the participants to understand performance, technology and operation of centrifugal pumps.
On completion of the course, the participants:
• know the working principle
• understand the performances of the machines
• have a better view of the design of the pump and their auxiliaries
• have discussed how to select a pump
• take participation in troubleshooting, meeting and maintenance.

COURSE CONTENTS
1. Hydrodynamics applied to a pumping system
• Pump performance
• Pipe system
• Case study
2. Centrifugal pump technology and selection
• Selection criteria
• Case study
• Mechanical seal selection
• Installation
3. Centrifugal pump operations
• Workshop on a dynamic simulator
4. Maintenance and trouble shooting

PARTICIPANTS
Mechanical Engineers, Maintenance Engineers and Supervisors, Service Engineers and Supervisors, Work over Engineers and Supervisors, Maintenance Technicians

INSTRUCTURE
Ir. Rini Dharmastiti, M.Sc., P.hD. (Praktisi Bidang Engineering)

VENUE
• Batch 1 : 4-6 Februari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 29 April – 1 Mei 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 2-4 September 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 4-6 November 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FACILITIES
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Centrifugal Gas Compressors ( Anti Surge Control)

Mar 22, 2014 by Rizki Satrio 0 Comments #Centrifugal Gas Compressors ( Anti Surge Control), #Teori dasar kompresor sentrifugal

DESKRIPSI
Surging pada kompresor sentrifugal harus dihindarkan, hubungan surging dengan karakteristik kompresor sentrifugal, faktor-faktor apa saja yang menyebabkan terjadinya surging serta bagaimana cara mengantisipasi hal tersebut akan dibahas secara tuntas dalam kursus ini.

MATERI
• Dasar-dasar thermodinamika
• Teori dasar kompresor sentrifugal
• Perhitungan Head kompresor sentrifugal
• Karakteristik Head – Kapasitas kompresor sentrifugal
• Karakteristik Head – Kapasitas sistem
• Pengaruh sifat fisik gas dalam kaitannya dengan surging
• Analisa terjadinya surging
• Anti surge
• Dasar teori kontrol dalam kaitannya dengan surging
• Anti surge control
• Tipe anti surge control
• Komponen anti surge control

PESERTA
Mechanical engineers, Maintenance engineers, & Suprevisors, Services engineers & Supervisors, Work over engineers and Supervisor, Maintenance technicians, etc.

INSTRUKTUR
Ir. Hermawan, M.Sc

METODE
Presentation, Discussion, Case Study, Evaluation Pre test & Pos Test

WAKTU & TEMPAT
• Batch 1  : 28-30 Januari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 22-24 April 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 26-28 Agustus 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 28-30 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Mechanical

Centrifugal Compressor Operations & Maintenance

Mar 22, 2014 by Rizki Satrio 0 Comments #Centrifugal Compressor Operations & Maintenance

DESKRIPSI
Setelah mengikuti kursus ini, peserta diharapkan memahami dasar operasi kompressor centrifugal, karakteristik kompressor, karakteristik sistem sehingga dapat melaksanakan pengoperasian dan cara pemeliharaannya dengan baik dan benar.

MATERI KURSUS
1. Dasar – dasar thermodinamika
2. Perhitungan head kompresor sentrifugal
3. Teori dasar kompresor sentrifugal
4. Pengaruh sifat fisik gas dalam kaitannya dengan surging
5. Karakteristik head kapasitas sistem
6. Karakteristik head kapasitas kompresor sentrifugal
7. Anti surge, anti surge control
8. Analisa terjadinya surging

PESERTA
Mechanical Engineers, Maintenance Engineers and Supervisors, Service Engineers and Supervisors, Work over Engineers and Supervisors, Maintenance Technicians, etc.

INSTRUKTUR
Ir. Rini Dharmastiti, M.Sc., P.hD. (Praktisi Bidang Engineering)

WAKTU & TEMPAT
• Batch 1 : 21-23 Januari 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 2 : 15-17 April 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 3 : 19-21 Agustus 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL
• Batch 4 : 21-23 Oktober 2014 Place : JGJ/BDG/JKT/BALI/SING/MAL

FASILITAS
1. Training Module (Hard and Soft copy (USB Flash Disk))
2. Certificate
3. Stationeries: NoteBook and Ballpoint
4. Souvenir (Jacket or waistcoat or T-Shirt)
5. Bag or backpackers
6. Training Photo
7. Training room with full AC facilities and multimedia
8. Once lunch and twice coffeebreak every day of training
9. Qualified instructor
10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)