Archive: October 10, 2013

Electrical

Protective Relay

Oct 10, 2013 by Rizki Satrio 0 Comments #collect, #complete, #derive, #device, #equipment, #jogja, #latihan, #pelatihan, #peserta, #portal, #Power, #protect, #protective, #Relay, #training, #transformers, #yogyakarta

DESKRIPSI
• Identify the Effects of Current Transformers (CTs) on Power Systems Protection.
• Recognize Protective Relay Coordination Related Disturbances and Outages.
• Collect the Required Data to Perform a Detailed Coordination Study.
• Derive Complete Protective Relay Device Settings to Protect the Electrical Power Systems Equipment.

MATERI KURSUS
1. Introduction to Power Systems Relaying
• System Planning
• Power System Studies
• Phasor Fundamentals
• Relaying Principles
• Review of Short Circuit Calculations
• Fundamentals of Coordination
2. Power Systems Grounding
• Symmetrical Components
• Ungrounded Systems
• Solidly-Grounded Systems
• Resistance-Grounded Systems
• Ground Fault Detection Methods
3. Current Transformers
• Types, CT Ratios, Polarity
• Burden, Accuracy Classes, Saturation Calculations
4. Protection Fundamentals
• Line, Cables, Feeders
• Medium Voltage Motors
• Power Transformers
5. Protective Relay Schemes
• Directional Relays
• Differential Relays
• Ground Relays

PESERTA
Consultants, application engineers, design engineers and electrical engineers from large industrial plants or municipal distribution systems with complex protective relay needs will find this course highly beneficial. Attendance at the Siemens Westinghouse Industrial Power Systems Analysis Seminar or equivalent is strongly recommended as a prerequisite

INSTRUKTUR
Tugino, ST.MT

Tempat : Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Protection On Electrical Power System

Oct 10, 2013 by Rizki Satrio 0 Comments #circuits, #consistent, #disturbance, #effects, #Electrical, #jogja, #latihan, #pelatihan, #peserta, #portal, #Power, #Protection, #protective, #recognize, #related, #requirements, #simpler, #study, #System, #training, #yogyakarta

Course Objectives:

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

Course Contents:

1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

  • Effects of Short Circuits
  • Fault Current Sources
  • Machine Reactances
  • Fault Current Characteristics

3. Electrical Equipment Ratings

  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus

4. Balanced Fault Calculations
5. Coordination Fundamentals

  • Procedures
  • Data Collection
  • Scaling Factors

6. Plotting Time/Current Curves

  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals

7. Equipment Protection and Coordination

  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)

Who Should Attend:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ Jambu Luwuk )

INSTRUCTOR
DR. Suharyanto

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Programmable Logic Control (Plc)

Oct 10, 2013 by Rizki Satrio 0 Comments #automasi, #bexcellent, #Control, #desain, #indusstri, #logic, #modul, #otomatis, #plant, #plat, #Plc, #portal, #program, #Programmable, #server, #speed, #tekanan, #teknologi, #variable

DESKRIPSI
Sistem Instrumentasi & control merupakan sebuah sistem yang meliputi pengaturan variable-variabel seperti temperature (temperature), tekanan (pressure), aliran (flow) dan kecepatan (speed). Variable-variable ini merupakan keluaran yang harus dijaga tetap sesuai dengan keinginan yang telah ditetapkan terlebih dahulu oleh operator yang disebut set point.
Seiring dengan perkembangan teknologi khususnya dibidang teknologi digital dan computer, sistem instrumentasi yang dikembakan menggunakan dukungan teknologi tersebut. Berbagai perangkat didesain untuk semakin memberikan kemudahan dan kahandalan didalam automasi industri. Salah satu perangkat yang banyak digunakan dalam automasi industri adalah Programmable Logic Controller (PLC) PLC adalah sebuah modul perangkat digital yang khusus digunakan mengontrol plant secara otomatis dan dapat diprogram sesuai dengan sistem/ plant yang akan dikendalikan. Programmable Logic Controller (PLC) dirancang untuk tahan terhadap debu, suhu, dan getaran sehingga diaplikasikan secara luas dalam dunia industri. Selain itu, PLC memiliki banyak modul masukan dan keluaran yang mendukung pengendalian proses industri yang kompleks.
Dengan menggunkan PLC, system pengontrolen proses industri menjadi lebih terintegresi dalam modul-modul yang lengkap dan lebih mudah serta dapat dikoneksikan dengan berbagai perngkat lain seperti server dan jaringan komputer guna pengembangan automasi yang lebih handal.

MATERI KURSUS
1. Pengantar instrumentasi industri dan dasar sistem kontrol
2. Plant sistem dan variable proses ( pengukuran flow, pengukuran level, dll)
3. Sistem kendali PID an algoritma PID
4. Konversi analog ke digital dan Konversi digital ke analog
5. Sistem Kendali secara digital
6. Liquid Sizing Control Valve
7. Pengenalan PLC dan Diagram Ladder
8. Perangkat Keras PLC dan Pendukungnya
9. Koneksi Peralatan dengan Modul Input/Output Diskret pada PLC
10. Komponen Latch, Timer, Counter, dan Fungsi-Fungsi Penting pada PLC
11. Konsep Logika dan Perancangan Program PLC Dasar
12. Perancangan Diagram Ladder Menggunakan Pendekatan Diagram Alir dan Diagram Keadaan
13. Aplikasi PLC pada industri dan perancangan sistem dengan PLC
14. Studi Kasus

PESERTA
Operator, teknisi, engineer, perancang, penyelia, manajer, dan lain-lainnya yang ingin mengetahui/memahami/mendalami pengertian mendasar mengenai prinsip kegunaan PLC dan aplikasinya pada industri

INSTRUKTUR
Miftahul Huda, S.T., M.T.

Tempat : Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ Jambu Luwuk )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Power Transformer Maintenance

Oct 10, 2013 by Rizki Satrio 0 Comments #bexcellent, #dampak, #Electric, #Electrical, #info, #latihan, #Maintenance, #pelatihan, #perawatan, #portal, #Power, #training, #Transformer

Deskripsi
Electric transformer merupakan salah satu peralatan yang penting dalam industri. Apabila terjadi kerusakan maka akan menimbulkan dampak berantai di dalam proses di suatu industri. Oleh karena itu diperlukan maintenance (perawatan) yang berkala agar supaya electric transformer tersebut bekerja dengan baik.

Materi Pelatihan
Materi pelatihan mencakup antara lain:
1. Pengantar trafo: struktur dan prinsip kerja; spesifikasi trafo
2. Analisis operasi trafo: rangkaian ekivalen; Pembebanan, losses & regulasi tegangan
3. Interprestasi data name plate 1: data listrik 1 ( ragam parameter ); data listrik 2 ( dampak )
4. Interprestasi data name plate 2: data mekanis 1 ( ragam parameter : suhu, dll ); data mekanis 2 ( dampak)
5. Sistem tindakan perawatan trafo: identifikasi keluhan & troubleshooting; preventive maintenance & overhaul
6. Pelaporan: proteksi parameter mekanis; proteksi parameter elektris
7. Proteksi trafo: pengukuran resistansi, DAR & PI; Hi-pot test
8. Diskusi kasus

Peserta
Pelatihan ini sangat bermanfaat bagi engineer/operator bagian utilitas dan maintenance

Instruktur:
Tugino, S.T., M.T.

Tempat : Hotel Papandayan, Bandung

Registrasi
Rp. 7.000.000 per orang (Non Residential)

Electrical

Low Voltage Lightning Protection Systems

Oct 10, 2013 by Rizki Satrio 0 Comments #bexcellent, #gedung, #implementasi, #Instalasi, #komponen, #komputer, #latihan, #Lightning, #Low Voltage, #pelatihan, #peralatan, #Petir, #portal, #Protection, #proteksi, #Systems, #telekomunikasi, #training

DESKRIPSI
Setelah mengikuti kursus ini, diharapkan peserta mengetahui tentang sistem proteksi petir yang dapat diimplementasikan pada berbagai peralatan seperti gedung, peralatan telekomunikasi, komputer dan peralatan lainnya.

MATERI
1. Introduction
2. Penyebab terjadinya tegangan lebih petir pada peralatan
3. Grounding System
4. Langkah-langkah pengamanan peralatan
5. Komponen dan peralatan pengaman petir
6. Instalasi dan pemasangan peralatan pengaman tegangan rendah terhadap petir.

PESERTA
Operator, teknisi, engineer, dan praktisi bidang kelistrikan dan proteksi petir dari berbagai perusahaan.

INSTRUCTOR
Tugino, ST.MT

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Electrical Power System Analysis

Oct 10, 2013 by Rizki Satrio 0 Comments #Analysis, #collect, #consistent, #distribution, #Electrical, #jogja, #pelatihan, #peserta, #portal, #Power, #powr, #settings, #simpler, #study, #System, #training, #yogyakarta

COURSE OBJECTIVES:

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

COURSE CONTENTS:
1. Introduction to Industrial Power Systems
2. Short Circuit Theory and Terminology

  • Effects of Short Circuits
  • Fault Current Sources
  • Machine Reactances
  • Fault Current Characteristics

3. Electrical Equipment Ratings

  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus

4. Balanced Fault Calculations
5. Coordination Fundamentals

  • Procedures
  • Data Collection
  • Scaling Factors

6. Plotting Time/Current Curves

  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals

7. Equipment Protection and Coordination

  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)

WHO SHOULD ATTEND:
This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

INSTRUCTOR
DR. Suharyanto

Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Electrical Equiptment Maintenance

Oct 10, 2013 by Rizki Satrio 0 Comments #activites, #component, #course, #customized, #Electrical, #Equiptment, #examples, #Maintenance, #specific

DESKRIPSI
This course is designed to meet the training needs of plant maintenance personnel engaged in the day-to-day troubleshooting and fault correction of industrial electrical equipment. It is appropriate for electrical maintenance personnel in need of a review of electrical basics and an introduction to more complicated industrial controls and test equipment. It is also suited for mechanical maintenance personnel that take part in plant electrical maintenance activities. The course can be customized to include examples of specific components, test equipment, and documentation found at the plant.

MATERI KURSUS
Introduction to electrical equipment maintenance, testing and troubleshooting
• Why maintain and test
• Overview of electrical preventive maintenance and testing
• Planning an EPM program
• Overview of testing and troubleshooting methods
• Review of dielectric theory and practice
Electrical safety, switching practices and precautions
• Introduction
• Electrical fire emergencies
• Effects of electrical shock
• First aid
Direct current voltage testing of electrical equipment
• Direct current voltage testing of insulation
• DC testing methods
• Transformer
• Cable and accessories
• Electrical switchgear and circuit breakers
• Motors and generators
• Evaluation of test data readings
• Precautions when making direct current test
Alternating current voltage testing methods
• Power factor and dissipation factor test methods
• Description of the power factor test equipment
• Basic test connections (test modes) for PF testing
• Safety precautions with PF testing
• PF testing of electrical apparatus insulation
Maintenance of electrical equipment
• Preventive maintenance of transformer
• Transformer testing
• Maintenance of cables
• Cable failures and their analysis
• Electrical switchgear maintenance and care
• Infrared inspection of electrical equipment
• Motor and generator maintenance
• Testing of motor and generator

PESERTA
• Electric Engineer/ Supervisor/ Superintendent
• Power Plant Maintenance Engineer/ Supervisor/ Superintendent
• Power Plant Operation Engineer/ Supervisor/ Superintendent
• Everybody or professional who wants to broaden knowledge or gain Benefit from this course

INSTRUKTUR
Ir. Teguh Santosa (Expert in electrical equiptment maintenance )

Tempat : Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Electrical

Electrical Circuit Breakers – Maintenance

Oct 10, 2013 by Rizki Satrio 0 Comments #basics, #bexcellent, #Breakers, #construction, #Electrical Circuit, #equipment, #Maintenance, #pelatihan, #portal, #preventive, #training, #yogyakarta

DESKRIPSI PELATIHAN
This electrical circuit breakers-maintenance training course will discuss application, installation, maintenance and testing issues related to low-, medium- and high-voltage switchgear and electrical circuit breakers. The course will provide the delegates with a solid understanding of switchgear theory and standards. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment with a strong emphasis on safety. The course will cover a wide range of material starting from the basics and moving on to more complex issues.
This course provides an overview of power system design and theory, focusing on the power distribution electrical circuit breakers used in common utility, industrial, commerical and institutional applications. Basic electrical circuit breaker construction, electrical safety, and common circuit breaker maintenance techniques are the major components of this course.
When brought on-site, this course can be supplemented by an in-depth study of the specific circuit breaker models used at the client’s facility. Hands-on training is provided wherever practical.

PESERTA PELATIHAN
This course is recommended for skilled trades, supervisors, and anyone involved in the maintenance of industrial power circuit breakers.

TUJUAN PELATIHAN
This course is designed to enable participants to:
• List the voltage convention classifications used in this course.
• Describe switchgear construction.
• Describe a ground fault relay system.
• Describe the three basic types of low and medium voltage circuit breaker contacts.
• Describe the molded case circuit breaker

MATERI PELATIHAN
1. Low Voltage Switchgear, Theory and Applications
Establishing a solid understanding of electrical switchgear design and operation is vital to its safe and reliable application. This course provides valuable technical information on low voltage circuit breakers and switchgear used in common industrial, commercial and utility applications.
• General Introduction
• The Spectrum of Switchgear
• Standards-Standards Organizations, Certification Marks and Applicable Standards
• Switchgear Drawings
• Switchgear Ratings
• Difference Between Switchgear & Switchboards
• Switchgear Factory Testing
• Short Circuit Current Estimation
• Ground Fault Protection
• Modern LV Switchgear-Design Features and Benefits
• Modern LV Power Circuit Breakers
• Modern LV Trip Units
• Wrap-up, Final Questions
2. 4160 Volt Breaker Overview
• Purpose/application
• Circuit breaker construction
• Circuit breaker operation
• Circuit breaker control
• Personnel and equipment safety factors
3. 4160 Volt Breaker Maintenance
• General breaker maintenance
• Adjustment
• Inspection and testing
• Maintenance intervals
• Troubleshooting and repair
4. Low-Voltage Breaker Overview
 Purpose and application
 Circuit breaker construction
 Circuit breaker operation
 Circuit breaker control
 Personnel and equipment safety
5. Low-Voltage Breaker Maintenance
 Inspection and testing
 Adjustments
 Troubleshooting and repair
6. Switchgear Overview
 System overview and interactions
 Switchgear components
 Power buses
 Safety
7. Grounding
 Principles of grounding
 Grounding procedures
 Ground and test device
8. Switchgear Maintenance
 Operation of switchgear devices
 Preventive maintenance
 Testing
 Corrective maintenance

INSTRUKTUR
Ir. Teguh Santoso (Prakstisi di bidang pembangkitan dan telah berpengalaman dalam berbagai kegiatan training, inspeksi dan konsultasi untuk pembangkit listrik)

Hotel berbintang di Yogyakarta ( Grand Aston/Ibis/ Phonix/ MM UGM )

FASILITAS
1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

REGISTRASI
Biaya kursus: Rp. 6.500.000,- per peserta (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)